ISO 8121-4 Electroplating Steel Toys Testing Equipment Loads For Stability Test
|
Detailed Product Description
|
Electroplating Steel Loads for Stability Test
Product Information Apply the load so that the major axis is perpendicular to the true
horizontal while the toy is on the specified incline. Design the load so that the height of its centre of gravity is (220 ± 10) mm above the seat surface. For toy scooters, however, use a test load with dimensions as specified in Figure 30. For all ride-on toys, secure the centre of gravity of the load both (43 ± 3) mm rearward of the frontmost portion of the designated seating area, and (43 ± 3) mm forward of the rear-most portion of the designated seating area. NOTE This involves two separate tests, If there is no designated seating area, place the load at the least favourable position in which it is reasonable to anticipate that a child will choose to sit or stand. Observe whether the toy tips over within 1 min after application of the load. Table-- Loads for stability test
Standard ISO 8121-1 2014 |
||||||
| Product Tags: swing durability tester swings testing equipment |
Related Products
|
6 Stations Switch Endurance Toys Testing Equipment AC220V / 50Hz |
|
ASTM WK4510 PS79-96 14mm / 26mm Press Ring Button Snap Pull Tester For Button Snap Rivets |
|
UL 1439 Sharp Edge Tester Toy Test Machine |
|
Baby Stroller ASTM F963 Toys Dynamic Strength Tester EN-71 Toy Dynamic Strength Testing Equipment |
|
EN71-1 Direct Current Field Dc Gaussmeter Resolution 5 G High Accuracy |
|
EN71-1 Toys Kinetic Energy Tester With Sensor Distance 10 - 30cm |
Email to this supplier