EN 11925-2 Building Material Flammability Tester with Touch Screen Control
|
Building Material Flammability Test Furnace with Touch Screen Control
Description The building materials flammability test furnace is in the normal combustion environment, with a small flame directly impacted the vertical specimen to determine the combustibility of the building products. The flammability test furnace for building materials is based on the principle of Kleinbrenner (Klein Brenner), which is directly impacted by a vertical flame. It is used to determine the combustion performance of B grade building materials (namely, the judgement of burning performance and flame retardant grade B of building materials).
Standards EN ISO 11925-2
Specifications The Bensen Burner applies flame time to the pattern 15s Single chip microcomputer control and digital display The diameter of the burner is 0.17mm,the length of the Bensen flame is 20mm ± 2mm and the burner can be tiltabled to 45 degrees. Apply a flame to a sample(1s-99 s)±0.5s,which can be adjusted arbitrarily, and the precision is + 0.2S Combustible gas source: propane above 95% purity Applicable standard: ISO11925-2:2002E< Test method for combustibility of building materials> Design standard:GB/T8626-2007< Test method for combustibility of building materials> In addition, 4.10 of the GB8626-2007 requires the wind speed device to be selected.Rencent,the inspectoin units test of the third part is basically required. But the wind speed unit is mismatched in the early stage and can be added later.
Features ①The operation in line with ergonomic design,test all through the touch screen operation,high degree of automation.Otherwise, the previous test results can be stored and can access the previous test data. ②Controllable automatic lifting of servo motor drive pattern frame. ③The Bunsen Burner can be advanced and retreat and adjusted. ④1.5mm stainless steel plate box ⑤Double angle observation test of 2 heat-resistant tempered glass doors, double (with lock) is convenient and practical. ⑥High pressure automatic ignition and durable combustion. ⑦The point fire source can be automatically tilted by 45 degrees. ⑧The height of the flame is adjusted by the precision regulating valve.
Flammability Testing Equipment Ignitability Tester...
|
Product Tags: horizontal flammability tester lab testing equipment |
![]() |
AS1334.10-1994 Conveyor Belt Flammability And Flame Propagation Characteristics Test Chamber |
![]() |
ASTM E1354 HEAT RELEASE CONE CALORIMETER WITH OXYGEN ANALYZER |
![]() |
Building Materials ASTM D2843 Smoke Density Tester For Assessment Of Density of Smoke |
![]() |
DIN 4102-1 ISO 11925-2 ( PLC ) Control Building Materials Flammability Ananlyzer |
![]() |
Iso5660-12002 Cone Calorimeter For Testing The Heat Release Rate Of Building Materials |
![]() |
Building Materials Flammability Tester Conveyor Belt Flammability And Flame Propagation Characteristics Test Chamber |