6.55 inches Touch Screen Controller Temperature and Humidity
Climatic Test Chamber
Product information
The system consists of the following
The test chamber is to provide high and low temperature and
humidity constant, high and low temperature and humidity
alternating test environment; including refrigeration systems,
heating systems, humidification / dehumidification / water systems,
duct systems, control systems, system safety protection devices.
Parameters
Inner size W*H*DCM | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*800 | 100*100*100 |
External size W*H*DCM | 90*136*154 | 100*146*184 | 100*161*210 | 110*171*237 | 150*186*257 | 150*186*267 |
Temperature range | -40°C~+150°C (A:-20°C B:-40°C ) |
Humidity range | 20%~98%R.H.(10%-98%R.H/5%~98%R.H) |
Temp humidity analytic accuracy/ uniformity | ±0.1°C;±0.1%R.H./ ±1.0°C;±3.0%R.H.is special optional condition. |
Temperature humidity control accuracy/fluctuation | ±1.0°C;±2.0%R.H./ ±0.5°C;±2.0%R.H. |
Heat/cooling time | About 5.2°C/min;about 1.2°C/min (5~10°C/min is a special optional condition ) |
Inner and outer materials | SUS#304 Stainless steel for inner chamber and Carton Advanced cold
plate nano paint for outer. |
Insulation materials | Resistant to high temp ,high density,formate chlorine,ethyl acetum
foam insulation materials |
Cooling system | Air cooling/single segment compressor(-20°C) ,air and water double
segment compressor (-40°C~-70°C) |
Protection devices | Fuse switch, compressor overload switch, refrigerant high and low
pressure protection switch, super humidity over-temperature protection switch, fuse, failure
warning system |
Parts | Watching window,50mm testing hole,PL internal bulbs,partition
plate,dry and wet ball gauze |
Controller | TEMI” South Korea“TEMI” “OYO” Japan's “OYO” Brand optional |
Compressor | Original France“Tecumseh”brand |
Power | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz |
Features
1. Programmable Temperature and Humidity control test chamber
2. Temperature range : -40℃ ~ +150 ℃
3. Humidity range: 20% ~ 98% RH
4. Cooling unit is French TECUMSEH compressor
5. Environment friendly Refrigerant R404A & R23
6. Humidification system with External isolation, stainless steel
surface evaporation humidifier
7. Heating element is Independent Nichrome electronic heating
system
8. Circulation with cold resistance and low noise centrifugal wind
wheel
9. Temperature sensor PT-100 , Resolution: ± 0.01 ℃
10. Humidity sensor dry and wet bulb sensor, Resolution: ± 1%
11. Build- in water tank , 25Liter
12. Programmable color display touch screen controller