EN 716-2 Bite Tester Furniture Testing Equipment Children Cot Test Equipment

Chridren Cot Test Equipment EN716-2 Bite Tester

​

Product information

Bite Tester consisting of two sets of teeth made from H13 high steel and hardened to 45 Rockwell C to 50 Rockwell C.

It is used to simulate children's teeth to test the protuberance of the surface on the toy (with) an ability to withstand bite. Belongs to toy safety test project.

Testing Standards

• EN1888
• BS EN716-2:2008 4.11
• BS EN1227-2:1999 4.4
• EN13209-2:2005 6.7

There are two teeth at the top and two at the bottom of the bite tester.Positioned so that the vertical centre line of one pair of teeth is 1-/+0.1mm in front of the centre line of the other set of teeth. In fully closed  position the teeth shall overlap each other by 1+/-0.1mm.

• The bite tester shall be equipped with a means whereby a force of (50 ± 5) N can be applied along its centre line in a direction tending to pull the teeth off the sample.
•  
• The bite tester shall be equipped with a means whereby a force of (50 ± 5) N can be applied along its centre line in a direction tending to pull the teeth off the sample