ASTM D1230 45 Degree Flammability Tester With Glass Observation Panel

ASTM D1230 Flammaility Testing Equipment 45 Degree Automatic Flammability Tester

Indroduction

45 Degree is used to evaluate compliance of fire-retardant products with fire-retardant performance standards according to the combustion method, and measures combustion characteristics such as After Glow and After Flame of test specimen installed at a 45-degree angle.

 45˚ Flammability tests After Flame Time and After Glow Time of specimen by heat in the chamber.

This measures flame retardance about specimen of less than 5 mm thick (Board, Plate, Sheet, Film and so on) by 45˚ Micro and Airmix method and evaluates materials about 3rd grade of flame retardance (less than 15cm and 5 seconds)

To determine the burning characteristics of textiles under controlled conditions. Stainless steel test cabinet with glass observation panel provided with automatic timing of flame spread in 0.1-second increments from ignition. Brushing Device including Spare Nylon Brush.

Key Specification

Standards:

ASTM 45 Degree Flammability Tester.pdf

Brush device