Self Lubricating Red PTFE DP4 Hydraulic Cylinder Bushing

Self Lubricating Sliding Bearing Hydraulic Red PTFE DP4 Composite Bushings

Dry Bush | Sliding Bearing Hydraulic PTFE Bushing

DP4 composite bushings offer good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions.We offer high performance, maintenance-free solution for many applications.

Customized red PTFE bushing to suit specific customer requirements

DP4-flanged-bearing

Oilless composite Sliding Self Lubricating Bearing Bushing

China Competitive Price Lubricated Stainless Steel Bushings with Red PTFE, Find details about China Hydraulic Bushing.

Hydraulic cylinder bushing & Cylinder Bushes

DP4 red PTFE bushings offer good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions.

Hydraulic bushings commonly used in automotive suspensions are expected to damp low-frequency high-displacement vibrations,

and also contribute to high-frequency acoustic isolation from relatively small displacements.

Hydraulic bushings typically have two hydraulic chambers connected by a channel.

The resonance of the fluid in the channel creates a mass-dampening effect.

A one-piece intermediate tube is used in some designs to improve the durability of the bushing and to separate the working part from

the elastomeric bushing where loads are removed from the outside of the elastomeric bushing where the channels are formed and the fluid seal

is provided for the fluid inside the bushing.

Hydraulic Bushing Feature

It is made of tin bronze as a matrix, sintered bronze spherical powder in the middle and laminated PTFE and high temperature resistant filler materials

on the surface and combined with the principle of oil cylinder and damper .

It has a high safety factor and is particularly suitable for places where continuous work cannot be interrupted for repairs and

where high temperatures cannot be refueled, especially suitable for frequent reciprocal occasions with a high inclination.

Hydraulic Bushing Material

Material: Steel Back + Porous Bronze Sinter +PTFE(DP4)

Hydraulic Bushing Structure

1:PTFE＆Fiber mix
2:Cu90Sn10
3:Copper back
4:Anodized coating-Cu/Sn/Zinc

Hydraulic Bushing Technical Data

Red PTFE Bushing Application

Red PTFE bushing are widely used in automobile shock absorbers, motorcycle shock absorbers and hydraulic cylinders.

Bearing Types

sleeve, flanged, washer, strip, customzied.

Red PTFE Bushing Structure

Sliding layer

PTFE + Fillers

Porous Bronze Sinter

Steel Backing

1: PTFE with polymer : 0.01-0.03mm
2:Porous bronze : 0.2-0.3mm
3:Steel backing : 0.7-2.3mm
4:Tin-plating 0.005mm or copper plating 0.008mm

Red PTFE Bushing Characteristics

• DP4 Red PTFE bushings offer good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
• Very good performance in lubricated applications
• Good performance in greased applications
• Suitable for linear, oscillating and rotating movements

Red PTFE Bushing Operating Performance

Red PTFE Bushing Properties

* Depending on operating conditions

AVAILABILITY

Bearing forms available in standard dimensions

• Cylindrical bushes
• Flanged bushes
• Sliding plates
• Thrust washers
• Customized bushing

Metric red PTFE bearings and imperial red PTFE bushings made to order:

Standard bushing forms in special sizes, half-bushings, stamped/deep drawn shapes, bearings with locating notches, lubricant holes and grooves, customized designs.