Specializing In The Production Of Non-standard CuSn6Zn6Pb3Graphite Phosphor Bronze Bearings,Graphite Copper Sleeve Special
Brass Bushing made to order from china. Solid Self-Lubricating
Inlaid BearingThis bearing is a combination of wear resistance and
self-lubricating properties of solid copper alloy body of
lubricants to use in the process without refueling maintenance...
Graphite Bronze Bushing is made of bronze CuSn6Zn6Pb3 with graphite evenly embedded in it. It can work
under low load, high temperature and middle speed, e.g. in
fireplace gate, convey way of the
Baking furnace, rubber machine, light industry and machine tools
industry etc.
Base material:CuSn6Zn6Pb3
Dynanic load:60N/mm2
Base hardness:HB80~100
Friction Coef.:<0.15
Temp Max.:350℃
Speed limit:2m/s
Bronze Bearings is made of bronze CuSn6Zn6Pb3 with graphite evenly
embedded in it. It can work under low load, high temperature and
middle speed, e.g. in fireplace gate, convey way of the baking
furnace, rubber machine, light industry and machine tools industry
etc.
Get a quote today!tolerance sizes ,material CHEMICAL ANALYSIS and
price for your application.
TOP BEARINGS after initial assembly maintenance, professional
self-lubricating bearing solutions, Get a free Quote Today!When the bearings are first used after assembly, they should be operated slowly under low load, which has the
following advantages:
1) smooth the uneven surface of the shaft and bearing, and smooth
the local convex surface supporting bearing load
2) correct the mounting error caused by bearing deformation, smooth
concave and convex surface, and increase the contact area
Solid Self-Lubricating Inlaid Bearing
The so-called non-oil means less fuel without refueling, the goal
of our research is to ensure that bearing this condition also
showed a good performance and extend its life as much as possible.
Self-lubricating bearings basic principle is that the solid
lubricant in the initial operational phase of the bearing surface
due to mutual friction asked to form ...
Oil-free bearings must be installed in a dry, clean
environment.Before installation, the machining quality of the
mating surface of the shaft and housing, the end face of the convex
shoulder, the groove and the connecting surface shall be carefully
checked.All mating surfaces must be carefully cleaned and burr
removed. Unprocessed surfaces of castings must be cleaned of sand.
Oil-free bearings should be cleaned with gasoline or kerosene
before installation, dry after use, and ensure good lubrication,
oil-free bearings generally use grease lubrication, can also use
oil lubrication.When using grease lubrication, the grease with
excellent properties such as no impurities, oxidation resistance,
rust resistance and extreme pressure should be selected.The filling
amount of grease is 30%-60% of the volume of oil-free bearing and
oil-free bearing box, so it should not be too much.Double-row
tapered roller oil-free bearing with sealing structure and oil-free
bearing with pump shaft have been filled with grease, which can be
directly used by users and cannot be cleaned again.
Material:CuSn6Zn6Pb3
International grades gb1776-87
International ISO1338 GCuSn6Zn6Pb3
German DIN GB - CuSn5Zn5Pb5
Japan's JIS
BC6
The United States ASTM/UNS C83600
British standard (BS) LG2
APPLICATION
Widely used in the hydraulic and pneumatic industries, forging
machine tool industry, plastic machinery industry, lifting handling
machinery, port machinery, office machinery, textile machinery,
food machinery, food machinery, chemical machinery, printing and
packaging, paper machinery, Steam locomotive, shipbuilding
industry, press industry, metallurgical machinery, engineering
machinery and so on.