Boundary - Lubrication Oilless Sliding Bearing DX Bushes for Mining
Machinery (SF-2)Boundary-Lubrication oilless sliding bearing to steel as matrix,
sintered bronze spherical powder as the middle layer, the surface
of rolling modified Poly oxymethylene (POM) and has storage pit. Plastic surface of the product thickness 0.5mm, has good wear
resistance, in the less oil or oil under the conditions of space
off to work correctly. It was adapted to work under conditions of
ambient temperature and low-speed heavy-duty venue to replace the
traditional copper sets, both to reduce the cost of extending the
service life. Product has been widely used in auto chassis, forging
machine, metallurgical and mining machinery, engineering machinery,
hydropower, steel rolling industry and other fields. Static 250N/mm2
Dynamic 140N/mm2
Oscillating 60N/mm2 PV Dry 2.8N/mm2. M/s
PV limit Oil 22N/mm2. M/s
Temp. Limit -40+130 Friction Coeff. 0.050.25μ
speed limit 0.25m/s
Thermal conductivity 2.03Kcal/M. Br. C TOB-2B marginal lubricating bearings Introduction
It is made of high quality low-carbon steel, sintered porous bronze
as its interlayer, with the compound of POM as its surface. And has
good load capacity & wear-resistant. It's used in vehicle
chassis, forming machine tools, steel metallurgical machinery,
mineral mountain machinery, hydraulic industry and rolling steel
industry, etc. It is without lead, can meet the requirements of
environment protection. |
| | Metallurgical structure | 1.POM 0.3~0.5mm
2.Porous bronze 0.2~0.3mm
3.Steel backing 0.4~2.2mm
4.Copper plating 0.008mm |
Recommended for applications involving intermittent operation or
boundary lubrication...
Automotive: suspension joints, kingpin assemblies and stub axles of
tucks, automobile driving joint hinges, steering and other
linkages, articulation joints, rear chassis hinges, fairleader
rollers...
Machine tool building industry: spindles in drill, grinding, and
milling machines, ram guide plates in multigame presses...
Agricultural equipment: gearbox, clutch, bale trips and wheel
caster swivels for bale accumulators, front axle pivot bearings,
steering idler box bearings and kingpin bearings for harvesters...
Be especially well-suited for applications where lubricant can not
be supplied continuously or repeatedly. | Tech. Data | | Max.Load | Static | 250N/m | | Temp.limit | -150℃~＋250℃ | | Very low speed | 140N/m | Max.speed | Pre-lubricated | 2m/s | | Rotating oscillating | 60N/m | Oiling
Grease continuous | ＞2m/s | | Max.PV | 3.6N/mm/s | Thermal conductivity | 4W(mK)1 | Coefficient of thermal
expansion | 11106K1 | Friction coefficient | 0.05~0.20 |
|
| | |
|
