SS Bronze Powder + PTFE Self Lubricating Bearings Multilayer
Composite
It is backed with stainless steel with porous bronze sintered on it
and polymers imbedded into the bores of the bronze. The stainless
steel back provides the bush with stronger mechanic strength and
load capability. By combining the metals and the polymers together,
the products are endowed with the lower friction coefficient and
good capacity of anti-abrasion and self-lubrication. Moreover, the
stainless steel back can be effectively preventing chemical
erosion. This series are widely applied in printing and dyeing
machines, and machines used in the ocean industry, etc.
Physical and Mechanical Performance
Performance Index | Data | Performance Index | Data |
Max. Load | Static Load | 250N/mm² | Friction Coefficient | Grease Lubrication | 0.08~0.20 |
Dynamic Load | 140N/mm² | Oil Lubrication | 0.02~0.07 |
Oscillation Load | 60N/mm² | Mating Axis | Hardness | >120 HB |
Linear Velocity | Grease Lubrication | 2.5 m/s | Roughness | Ra=0.4~1.25 |
Oil Lubrication | 5 m/s | Working Temperature | -200~+280℃ |
Max. PV value | Grease Lubrication | 3.6 N/mm²·m/s | Heat-conducting Coefficient | 40 W/(m*k) |
Oil Lubrication | 50 N/mm²·m/s | Heat-expansion Coefficient (Axial) | 16*10^-6k |
Physical and Mechanical Performance
Normally, the surface polymer is chemical-erosion resistant
quality. However it can be eroded by fused alkali metal and high
temperature fluorine compounds. Stainless steel back is also
chemical erosion preventive.