Siemens SMP16-CPU086 03029123-02 1.6GHz 1GB RAM Module AS-IS, smt
nozzle, pick and place nozzle, smt feeder, siemens smt machine, smd
parts, feeder smd, siemens smt, siemens feeder, siemens nozzle,
wholesales price of siemens smt spare parts We also can supply the following parts: 00116430-01 | Waffle-Pack-Magazine mounting for SIPLACE. Mounted succeeds on the
component changeover table. 9 feeder locations required. Required
for use with item no. 116431. | 00116807-01 | SMEMA Interface for single and dual conveyor SIPLACE S/F. | 00116933S03 | SIPLACE Docking Station COT40 for provision of an infrastructure
for communication between Setup Center and the X-Feeder modules.
Stand alone operation allows the X-Feeders to be supplied with
power. Can be set to the SMEMA heights 830/ 900/ 930/ 950 mm. Line
voltage: 88-264V. Compressed air pressure: 5-10 bar. | 00116936-01 | SIPLACE Splice Detection Hub for Table Controller: This item is
needed to prepare a SIPLACE station for splice detection. It
contains a hub for connection of up to 4 table controllers for
SIPLACE HS-xx. Also, cabling and mounting material is included.
Additionally, the respective table controller(s) and splice sensors
need to be ordered. | 00116961-01 | Protection Shield for SIPLACE Placement Stations 1 feeder location. | 00116962-01 | Protection Shield for SIPLACE Placement stations 6-10 feeder
locations. | 00116963-01 | Protection Shield SIPLACE Placement stations 11-20 feeder
locations. | 00117010S03 | Dip module f. fluxes and adhesive | 00117130S06 | DCA camera | 00117185-01 | Retrofitting kit to 110/208V operating voltage for SIPLACE S/F.
Delivery as a part of station free of charge. Attention: If
retrofitted at a costumer a voltage savety check (DIN EN 60204)is
necessary. For assistance please ask SIPLACE SMT Service. SIPLACE
expert with special tools highly recommended, risk of damage and
warranty losses Voltage test required | 00117261-03 | The Head Re-Configuration Kit is necessary to exchange the Collect
and Place Head of SIPLACE placement station with Head Modularity,
SIPLACE F5 HM (117500), in a 6-Segment Collect and Place Head. The
Kit includes: 6-Segment Collect and Place Head, Set Nozzles, Set
Sleeves, Cover, Tools for Head exchange, Box for replaced Head,
Technical Manuel. With this kit the Head exchange can be performed
by trained service personnel at customer side within 8 hours. If
required the automatic nozzle changer for the 6-Segment Collect and
Place Head has to be ordered separately. SIPLACE expert with
special tools highly recommended, risk of damage and warranty
losses | 00118012-01 | Package for placement of 0201 components (size 0.6 x 0.3mm).
Suitable for all SIPLACE F5 HM, S-27 HM, HS-xx, HF-Series and
Compact. The Package includes: 12 x Nozzle type 902, 0201 Handbook.
In addition the special 3 x 8mm 0201 feeder module is necessary for
any 0201 placement (item number: 141099). System requirement:
Station computer >= 405.01 .Line computer >= 501.01. | 00118021S01 | The component sensor as additional optical sensor module verifies
the presence / absences of a small component short just before
placement / pickup respectively. Suitable for all SIPLACE S-27 HM,
X/D-Series and HS-xx in combination with the 12-Segment Collect and
Place Head. One Package per Head is required. The component sensor
requires the modular head board. This might have to be retrofitted
at SIPLACE S-23 HM item no. 359488 (and in field upgraded SIPLACE
S-25 HM) and SIPLACE HS-50 item no. 359489. When using the nozzle
type 906 for 0201 placement the sensor is mandatory. System
requirement: Station computer >= 503.01 .Line computer >=
503.01 or SIPLACE PRO 1.3. | 00118100-01 | Mechanical Head Crash Protection for SIPLACE S-20, S-23 HM, S-25 HM
and S-27 HM to avoid a head crash with feeders and/or feeder flaps.
Restriction 6-Segment Collect and Place Head with nozzels type
820/821/921. | 00118101-01 | Adapter device SIPLACE S/F at changeover table with wheels, for
reel holder (item no:141204) of 3x8mm feeders (item
no:141098,141099). | 00118261-03 | Nozzle changer for 12-Segment Collect and Place Head of the SIPLACE
S-27 HM. Two nozzle changers are needed, one per head.
Stationssoftware higher than 502.xx, Linesoftware higher than
502.xx. Option contains 8 magazines for 12 nozzles. | 00118262-01 | Nozzle changer for 6-Segment Collect and Place Head of the SIPLACE
S-27 HM. Stationssoftware higher than 502.xx; Linesoftware higher
than 502.xx. Option contains: 2 magazines for big nozzles and 3
magazines for little nozzles. | 00118271-01 | This item is required one time per changeover table. One SIPLACE
S/F can be equipped with 2 table controllers (option MTC does not
fit!). The following items are included: Splice Detection Table
Controller (1 pcs). | 00118271S01 | This item is required one time per changeover table. One SIPLACE
S/F can be equipped with 2 table controllers (option MTC does not
fit!). The following items are included: Splice Detection Table
Controller (1 pcs). | 00118525-01 | Additional mechanical PCB alignment for S-27 HM dual conveyor: with
this option PCBs with a length/width ratio >2/1 can be
transported with the small side at the dual conveyor belts into the
placement area. This option is only available for dual conveyor. | 00118526-01 | Additional mechanical PCB alignment for S-27 HM single conveyor:
with this option PCBs with a length/width ratio >2/1 can be
transported with the small side at the single conveyor belts into
the placement area. This option is only available for single
conveyor. | 00118528-01 | Long Board Support for SIPLACE S-27 HM Single Conveyor: this Option
supports PCBs up to a size of 610mm x 460mm (24 inch x 18 inch ).
This Option must be ordered per conveyor lane.This option can only
be used for single conveyor. Content: 2 supports long PCBs, 1
lifting table option SC. | 00119011-01 | Adapter device HS-xx changeover table with wheels version 2
(119022) for reel holder (item no:141204) of 3x8mm feeders (item
no:141098,141099). Not compatible to COT D4 119821. | 00119016-01 | Air filter box for SIPLACE HS-xx inclusive fan with increased power
and covers with filter mat. 1 package per machine required. This
package can be used for all machine types HS-50 and following. | 00119030-01 | Extension Cable (1.5m long) from external Power Supply to HS-xx/D4
feeder changeover table. | 00119160-01 | One set of nozzle changers for 12-Segment Collect and Place Head
HS-xx. A maximum of eight are possible for SIPLACE HS-xx. A maximum
of two for each gantry.Option includes: 4 nozzle changers with 5
magazines for 12 nozzles, 4 nozzle discarding devices. Station
software version from 501.xx, line computer software version
501.xx. | 00119161-01 | Nozzle changer for 12-Segment Collect and Place Head SIPLACE HS-xx.
A maximum of eight are possible for SIPLACE HS-xx. A maximum of two
for each gantry. Option includes: 5 magazines, each for 12 nozzles.
Station software version from 501.xx, line computer software
version from 501.xx. | 00119162-01 | Additional set of nozzle changers for 12-Segment Collect and Place
Head HS-xx. A maximum of eight are possible for SIPLACE HS-xx. A
maximum of two for each gantry. Option includes: 4 nozzle changers
with 5 magazines for 12 nozzles, 4 nozzle discarding devices, 1
SLIO-module. Station software version from 501.xx. | 00119185-02 | Retrofitting kit to 230/400V operating voltage for SIPLACE
HS-xx/D4. Delivery as a part of station free of charge. Attention:
If retrofitted at a customer a voltage savety check (DIN EN 60204)
is necessary. For assistance plese ask SIPLACE SMT Service. SIPLACE
expert with special tools highly recommended, risk of damage and
warranty losses Voltage test required | 00119405-01 | Long Board Option for SIPLACE HS-50: with this Option we can handle
pcb's up to 610mm x 460mm (24 inch x 18 inch) in the single
conveyor mode. This option can be used for single and dual conveyor
systems. | 00119610S02 | The Feeder Protection consists of a cover over the feed area
(119622,119755). If a feeder is pressed up or if feeder flaps are
projecting upwards, the EMERGENCY OFF is actuated. The option
contains one protection plate, which can be installed in location 2
or 4. | 00119618S02 | CO camera, stationary P+P (type 20) 8x8 | 00119633S02 | The Feeder Protection consists of a cover over the feed area
(119622,119755). If a feeder is pressed up or if feeder flaps are
projecting upwards, the EMERGENCY OFF is actuated. The option
contains one protection plate, which can be installed in location 1
or 3. | 00119665-01 | The 12-Segment Collect and Place Head Re-Configuration Kit is
necessary to exchange the actual Placement Head of the SIPLACE HF
and HF/3 (119600 and 119650) Placement Machine with Head
Modularity, in a 12-Segment Collect and Place Head. The Kit
includes: 12-Segment Collect and Place Head, Set Nozzles, Set
Sleeves, Cover, Head Servo Cards, Head Adapter board, Cables,
additional parts, Tools for Head exchange, Box for replaced Head
and a Technical Manual. With this kit the Head exchange can be
performed by trained service personnel at customer side within 8
hours. If required the automatic nozzle changer for the 12-Segment
Collect and Place Head has to be ordered separately. SIPLACE expert
with special tools highly recommended, risk of damage and warranty
losses | 00119666-01 | The 6-Segment Collect and Place Head Re-Configuration Kit is
necessary to exchange the actual Placement Head of the SIPLACE HF
and HF/3 (119600 and 119650) Placement Machine with Head
Modularity, in a 6-Segment Collect and Place Head. The Kit
includes: 6-Segment Collect and Place Head, Set Nozzles, Set
Sleeves, Cover, Head Servo Cards, Head Adapter board, Cables,
additional parts, Tools for Head exchange, Box for replaced Head
and a Technical Manual. With this kit the Head exchange can be
performed by trained service personnel at customer side within 8
hours. If required the automatic nozzle changer for the 6-Segment
Collect and Place Head has to be ordered separately. SIPLACE expert
with special tools highly recommended, risk of damage and warranty
losses | 00119689-02 | PCB BARCODE READER 2D FOR S,F This scanner assembly is used
together with the mounting kit 00119442-01 (in SIPLACE S, F). | 00119718S02 | Additional high resolution, stationary component camera digital in
X-Series,D1,D3 machines for centering of FlipChips. With this head
a component range from 0.2mm x 0.2mm up to 16mm x 16mm can be
placed. The smallest ball diameter is 80um, the min. Lead / Ball
pitch 250um / 140um. | 00119720S01 | Package for placement of 0201 components (size 0.6mm x 0.3mm).
Suitable for SIPLACE X/D-Series (SCSW 605)equipped with the
12-Segment Collect and Place head. The Package includes: High
resolution camera (Exchange between standard digital component
camera. The standard digital component camera is then not part of
delivery), 24 x Nozzle type 906 oval tip,Component Sensor,
Reconfiguration Instructions for 0201 placement. A 0201 Paket is
essential for each placement head. In addition for the D-Series
(and X-Series equipped with S-Feeders) the special 3x8mm 0201
feeder module is necessary for any 0201 placement (item number:
141099).This item number can only be ordered in combination with
SIPLACE X/D-Series. It cannot be ordered seperately. | 00119721-01 | The Twin Head Re-Configuration Kit is necessary to exchange the
actual Placement Head of the SIPLACE X-Series/D3 (119700 / 119750 /
119780 / 119870) Placement Machine with Head Modularity, in a Twin
Head. The Kit includes: 2 Pick and Place Modules, Stationer
Component-Camera (Digital), a nozzle changer with 3 Dual Garage
Magazine and 1 Single Garage Magazine, Cover, Head Servo Cards,
Head Adapter board, Vision Controller, Cables, additional parts,
Tools for Head exchange, Box for replaced Head and a Technical
Manual. With this kit the Head Exchange can be performed by trained
service personnel at customer side within 8 hours. If required the
automatic nozzle changer for the 6 nozzle head has to be ordered
separately. The customer service isn not included in this price.
SIPLACE expert with special tools highly recommended, risk of
damage and warranty losses | 00119747-01 | Holder for Nozzle Changer TwinHead for MTC X-Ser. | 00119753-01 | The Re-Configuration Kit Highforce Head is necessary to exchange
the TwinHead of a placement machine of SIPLACE HF/X-Series by an
Highforce Head The Highforce Head is a modified TwinHead, which is
able to reach placement forces up to 30N (+/-15%) with SIPLACE
HF/D3/X-Series. The kit includes: two Highforce Pick and Place
Modules, servo-cards, additional parts, one software CD, tools for
head exchange, box for replaced head and a technical manual.
Customer service is not included. If the customer sends the used
TwinHead modules back to us, he will get a credit of 60% of the
original spare part price (03001095S03).Preconditions:Line software
Siplace Pro 2.1SP2 or higher, Station software 505.03 or higher. | 00119754-01 | The Re-Configuration Kit Highforce Twin Head is necessary to
exchange the Collect and Place Head of a placement machine of
SIPLACE X-Series by an Highforce TwinHead. The Highforce TwinHead
is a modified TwinHead, which is able to reach placement forces up
to 30N (+/-15%) with SIPLACE X-Series. The kit includes: two
Highforce Pick and Place Modules, one stationary camera system, one
nozzle changer with three standard magazines (dual garage) and one
magazine for customized nozzles, head protection cover,
servo-cards, head adaptor boards, cables, additional parts, one
software CD, tools for head exchange, box for replaced head and a
technical manual. Customer service is not included.
Preconditions:Line software Siplace Pro 4.1 or higher, Station
software 603.01 or higher. SIPLACE expert with special tools highly
recommended, risk of damage and warranty losses | 00119760-01 | The 12-Segment Collect and Place Head digital Re-Configuration Kit
is necessary to exchange the actual Placement Head of the SIPLACE
X-Series/D3 (119700,119750,119780,119870) Placement Machine with
Head Modularity, in a 12-Segment Collect and Place Head with
Digital Camera. The Kit includes: 12-Segment Collect and Place Head
digital, Set Nozzles, Set Sleeves, Cover, Head Servo Cards, Head
Adapter board, Cables, additional parts, Tools for Head exchange,
Box for replaced Head and a Technical Manual. With this kit the
Head exchange can be performed by trained service personnel at
customer side within 8 hours. If required the automatic nozzle
changer for the 12-Segment Collect and Place Head digital has to be
ordered separately. SIPLACE expert with special tools highly
recommended, risk of damage and warranty losses | 00119761-01 | The 6-Segment Collect and Place Head digital Re-Configuration Kit
is necessary to exchange the actual Placement Head of the SIPLACE
X-Series (119700,119750,119780) Placement Machine with Head
Modularity, in a 6-Segment Collect and Place Head with Digital
Camera. The Kit includes: 6-Segment Collect and Place Head digital,
Set Nozzles, Set Sleeves, Cover, Head Servo Cards, Head Adapter
board, Cables, additional parts, Tools for Head exchange, Box for
replaced Head and a Technical Manual. With this kit the Head
exchange can be performed by trained service personnel at customer
side within 8 hours. If required the automatic nozzle changer for
the 6-Segment Collect and Place Head digital has to be ordered
separately. SIPLACE expert with special tools highly recommended,
risk of damage and warranty losses | 00119762-01 | The 20-Segment Collect and Place Head digital Re-Configuration Kit
is necessary to exchange the actual Placement Head of the SIPLACE
X-Series (119700,119750,119780) Placement Machine with Head
Modularity, in a 20-Segment Collect and Place Head digital. The Kit
includes: 20-Segment Collect and Place Head, Set Nozzles, Head
Servo Cards, Head Adapter board, Cables, additional parts, Tools
for Head exchange, Box for replaced Head and a Technical Manual.
With this kit the Head exchange can be performed by trained service
personnel at customer side within 8 hours. If required the
automatic nozzle changer (119715/119716) for the 20-Segment Collect
and Place Head digital has to be ordered separately. Additional
recommended the Verify component reject bin (116848). Mandatory
required are Changeover Table X-Series (119722) and X-Feeder.
Attention: Not for SIPLACE X4i. SIPLACE expert with special tools
highly recommended, risk of damage and warranty losses | 00119775S01 | Package for placement of 0201 components (size 0.6mm x 0.3mm).
Suitable for SIPLACE D4i/D2i/D1i equipped with the 12-Segment
Collect and Place head. The Package includes: High resolution
camera (Exchange against standard digital component camera. The
standard digital component camera is then not part of the
delivery), 24 x Nozzles type 906 oval tip, Component Sensor,
Reconfiguration Instructions for 0201 placement. A 0201 package is
essential for each placement head. This item number can only be
ordered in combination with new SIPLACE Di-Series. It cannot be
ordered separately. Machine System requirement: Station Software
from 605.03 SP2 and SIPLACE Pro from Version 10.0 or higher. | 00119786-02 | vacuum pump install kit for X2,X3,X4 | 00119787-02 | Vacuum pump for X-series | 00119860-01 | The Reconfigurationkit C&P is neccessary to exchange the
6-Segment Collect and Place Head of the D1/D2 with a 12-Segment
Collect and Place Head. The Kit includes: 12-Segment Collect and
place Head, Component camera, Set Sleeves, Cover, Tools for Head
exchange, Box for replaced Head, Nozzles (Type 904) and a technical
manual for the head exchange. With this kit the Head exchange can
be performed by trained Service personal at customer side within 8
hours. If required, the automatic nozzle changer for the 12-Segment
Collect and place head has to be ordered seperatly. | 00119861-01 | The Reconfigurationkit C&P is neccessary to exchange the
12-Segment Collect and Place Head of the D1/D2 with a 6-Segment
Collect and Place Head. The Kit includes: 6-Segment Collect and
place Head, Component camera, Set Sleeves, Cover, Tools for Head
exchange, Box for replaced Head, Nozzles (Type 904) and a technical
manual for the head exchange. With this kit the Head exchange can
be performed by trained Service personal at customer side within 8
hours. If required, the automatic nozzle changer for the 6-Segment
Collect and place head has to be ordered seperatly. |
Siemens SMP16-CPU086 03029123-02 1.6GHz 1GB RAM Module AS-IS Our Services
Professional service PY will offer you the most favorable new and second-hand SMT
machines and accessories to provide comprehensive and first-class
after-sales service. Repair services Professional technicians protect the quality of products. Quality guaranteed period is offered after repair service. Top quality PY will repay the trust of new and old customers with the most
superior quality products, the most cost-effective price and the
most complete technical support. Packaging 1. Carton box/ wooden case/ package according to the customer' s
required. 2. The packaging is very safe and strong, We guarantee that the
product will be delivered to you in good condition. Shipping 1. We will send the products to your designated place by FedEx/
UPS/ DHL/ EMS in time. 2. If you need to use it urgently, we can also arrange air and sea
transportation for you to ensure the safe and timely delivery of
the goods to your hands. if you have any special needs Please notify us right now! FAQ:
Q:How long is your delivery time? A: We`ve cooperation with Fedex, TNT and DHL. It is shipped directly from
Shenzhen. The time is fast. If it is in stock, it is usually 3
days. If there is no stock, it is calculated by quantity. Q: How about our spare parts quality? A: We`ve been doing exportation to Europe and USA for years ,
quality is the premier factor we concern. Q.Why choose PY? A: High quality products with reasonable price, quick shipping. B: Good technical training and technical support C: Professional international business communication and support D: Professional options for international transport E: Reliablebrands supplier.
|