| 00047104-01 | Plug B-M5-AI |
| 00047555S01 | Plastic Hose, PU-4, blue, 5m each |
| 00048315-01 | GRIPPING RING |
| 00048346-01 | DIN 6799 - 8-ST |
| 00066141-01 | Feeder Bags 650mm |
| 00066172-02 | PROTECTION COVER FOR INTERMEDIATE PCB |
| 00066173-03 | PACKAGE INSIDE FOR HEAD 6/12 |
| 00066191S01 | PACKAGE FOR FEEDER 12/16 S |
| 00066192S01 | PACKAGE FOR FEEDER 24/32 S |
| 00066193S01 | PACKAGE FOR FEEDER 44 S |
| 00066268-01 | Pack for 3x8mmS-Feeder |
| 00066298-01 | PACKAGE FOR FEEDER 88 mm S |
| 00066312S01 | PLASTIC CASE 375*270*90 ESD |
| 00066315-01 | PE-FOAM INSERT FOR BOX 00325829-01 |
| 00091001-02 | Gloves Leather |
| 00092020-01 | JOBBER TWIST DRILL 1,1 |
| 00092022-01 | JOBBER TWIST DRILL |
| 00092026-01 | JOBBER TWIST DRILL |
| 00094020-01 | THICKNESS GAUGE 0,05 - 1,00mm |
| 00095304-01 | Countersunk screw DIN965-M3x6-4.8 |
| 00095312S01 | SCREW M4*10 DIN965 |
| 00095474-01 | Disc 6,4 DIN125-A |
| 00095482-01 | DIN 471-6x0.7-C67 |
| 00095614-01 | DIN 6325-3m5x18-St |
| 00096201-01 | ALLAN KEY 0,9 mm |
| 00096203-01 | ALLAN KEY 1,3 mm |
| 00096217-01 | ALLEN/Hex KEV SET |
| 00096290-01 | SPANNER SET 15 PIECES |
| 00098614-01 | DEEP-GROVE BALL BEARING 4*13*5 624-2Z |
| 00098614S01 | DEEP-GROVE BALL BEARING 4*13*5 624-2Z |
| 00098615-01 | DEEP-GROOVE BALL BEARING 5*16*5 625 2Z |
| 00098616S01 | DEEP-GROOVE BALL BEARING 19*6*6 626-2Z |
| 00098617S01 | BALL BEARING |
| 00098618S01 | BALL BEARING 8*22*7 608 2Z |
| 00116076-03 | TRANSPORTHIGHT 930/950 CHANGE-OVER-TABLE |
| 00116088-02 | Transport height 900mm, for change-over table. Adapting of SIPLACE
change-over tables on transport height 900mm. |
| 00116113S01 | Set placement head nozzle sleeves for SIPLACE
80S-20/F4/F5/S23HM/HS50 12 units, with air blow. Additional set for
change over in case of cleaning purpose to raise station time. |
| 00116114S01 | Set Nozzle Sleeves (6) SIPLACE |
| 00116140-02 | Regulator unit for linear and bulk vibrator feeders for use with
142025 Type II. Required for use with SIPLACE . 1 regulator unit
required per module. |
| 00116161-03 | Nozzle changer for 12-Segment Collect and Place Head SIPLACE F5
HM.Station software version 402.xxx and later. Line software
version 402.xxx and later. Option includes: 7 magazines, each for
12 nozzles. |
| 00116162S02 | Nozzle changer for 6 nozzle C+P Head SIPLACE 80 F4/F5 Station
software version 403.xxx or higher Line computer software 403.xxx
or higher Option includes: 2 magazines for big nozzles 3 magazines
for small nozzles |
| 00116190-01 | Upgrade kit to use outdated feeder changeover tables on SIPLACE
S-20, F4, F5 HM together with moveable feeder changeover tables. |
| 00116220-01 | Adapter plate SIPLACE S/F change-over table without wheels version
2 for reel holder 3x8mm or 3x8mm 0201/0402 feeder respectively |
| 00116225-01 | An additional mechanical device to avoid incorrect feeder stand on
changeover table due to improper operator handling. The mechanical
attachment is required per changeover table. The additional feeder
fastening attachment accommodates all SIPLACE feeders delivered
since CW 34/98. Please pay attention to the preconditions which are
discribed in the Product Status Report for all feeders delivered
before CW 34/98. |
| 00116380-01 | Kit to splice component tapes. Includes SIPLACE splicing gripper
(classic version for single strips), splice strip box, tape
connectors, tape threaders, holder, operater tools, Job Poster. For
first equipping of new customers. |
| 00116416S01 | Additional component vision module SIPLACE 80 F/F4/F5 for flip chip
bump centering. Field of view: 9mmx11.5mm. Largest flip chip with
single measurement: 7mm x 9mm.Smallest,reliably recognizable bump
diameter: 0,1mm. Reliable processing of IC pitch: 0,25mm |
| 00116417S01 | Additional component vision module SIPLACE 80 F/F4/F5 for flip chip
bump centering. Field of view: 9mmx11.5mm. Largest flip chip with
single measurement: 7mm x 9mm.Smallest,reliably recognizable bump
diameter: 0,1mm. Reliable processing of IC pitch: 0,25mm |
| 00116421S03 | Additional nozzle changer for IC head |
| 00116430-01 | Waffle-Pack-Magazine mounting for SIPLACE. Mounted succeeds on the
component changeover table. 9 feeder locations required. Required
for use with item no. 116431. |
| 00116807-01 | SMEMA Interface for single and dual conveyor SIPLACE S/F. |
| 00116933S03 | SIPLACE Docking Station COT40 for provision of an infrastructure
for communication between Setup Center and the X-Feeder modules.
Stand alone operation allows the X-Feeders to be supplied with
power. Can be set to the SMEMA heights 830/ 900/ 930/ 950 mm. Line
voltage: 88-264V. Compressed air pressure: 5-10 bar. |
| 00116936-01 | SIPLACE Splice Detection Hub for Table Controller: This item is
needed to prepare a SIPLACE station for splice detection. It
contains a hub for connection of up to 4 table controllers for
SIPLACE HS-xx. Also, cabling and mounting material is included.
Additionally, the respective table controller(s) and splice sensors
need to be ordered. |
| 00116961-01 | Protection Shield for SIPLACE Placement Stations 1 feeder location. |
| 00116962-01 | Protection Shield for SIPLACE Placement stations 6-10 feeder
locations. |
| 00116963-01 | Protection Shield SIPLACE Placement stations 11-20 feeder
locations. |
| 00117010S03 | Dip module f. fluxes and adhesive |
| 00117130S06 | DCA camera |
| 00117185-01 | Retrofitting kit to 110/208V operating voltage for SIPLACE S/F.
Delivery as a part of station free of charge. Attention: If
retrofitted at a costumer a voltage savety check (DIN EN 60204)is
necessary. For assistance please ask SIPLACE SMT Service. SIPLACE
expert with special tools highly recommended, risk of damage and
warranty losses Voltage test required |
| 00117261-03 | The Head Re-Configuration Kit is necessary to exchange the Collect
and Place Head of SIPLACE placement station with Head Modularity,
SIPLACE F5 HM (117500), in a 6-Segment Collect and Place Head. The
Kit includes: 6-Segment Collect and Place Head, Set Nozzles, Set
Sleeves, Cover, Tools for Head exchange, Box for replaced Head,
Technical Manuel. With this kit the Head exchange can be performed
by trained service personnel at customer side within 8 hours. If
required the automatic nozzle changer for the 6-Segment Collect and
Place Head has to be ordered separately. SIPLACE expert with
special tools highly recommended, risk of damage and warranty
losses |
| 00118012-01 | Package for placement of 0201 components (size 0.6 x 0.3mm).
Suitable for all SIPLACE F5 HM, S-27 HM, HS-xx, HF-Series and
Compact. The Package includes: 12 x Nozzle type 902, 0201 Handbook.
In addition the special 3 x 8mm 0201 feeder module is necessary for
any 0201 placement (item number: 141099). System requirement:
Station computer >= 405.01 .Line computer >= 501.01. |
| 00118021S01 | The component sensor as additional optical sensor module verifies
the presence / absences of a small component short just before
placement / pickup respectively. Suitable for all SIPLACE S-27 HM,
X/D-Series and HS-xx in combination with the 12-Segment Collect and
Place Head. One Package per Head is required. The component sensor
requires the modular head board. This might have to be retrofitted
at SIPLACE S-23 HM item no. 359488 (and in field upgraded SIPLACE
S-25 HM) and SIPLACE HS-50 item no. 359489. When using the nozzle
type 906 for 0201 placement the sensor is mandatory. System
requirement: Station computer >= 503.01 .Line computer >=
503.01 or SIPLACE PRO 1.3. |
| 00118100-01 | Mechanical Head Crash Protection for SIPLACE S-20, S-23 HM, S-25 HM
and S-27 HM to avoid a head crash with feeders and/or feeder flaps.
Restriction 6-Segment Collect and Place Head with nozzels type
820/821/921. |
| 00118101-01 | Adapter device SIPLACE S/F at changeover table with wheels, for
reel holder (item no:141204) of 3x8mm feeders (item
no:141098,141099). |
| 00118261-03 | Nozzle changer for 12-Segment Collect and Place Head of the SIPLACE
S-27 HM. Two nozzle changers are needed, one per head.
Stationssoftware higher than 502.xx, Linesoftware higher than
502.xx. Option contains 8 magazines for 12 nozzles. |
| 00118262-01 | Nozzle changer for 6-Segment Collect and Place Head of the SIPLACE
S-27 HM. Stationssoftware higher than 502.xx; Linesoftware higher
than 502.xx. Option contains: 2 magazines for big nozzles and 3
magazines for little nozzles. |
| 00118271-01 | This item is required one time per changeover table. One SIPLACE
S/F can be equipped with 2 table controllers (option MTC does not
fit!). The following items are included: Splice Detection Table
Controller (1 pcs). |
| 00118271S01 | This item is required one time per changeover table. One SIPLACE
S/F can be equipped with 2 table controllers (option MTC does not
fit!). The following items are included: Splice Detection Table
Controller (1 pcs). |
| 00118525-01 | Additional mechanical PCB alignment for S-27 HM dual conveyor: with
this option PCBs with a length/width ratio >2/1 can be
transported with the small side at the dual conveyor belts into the
placement area. This option is only available for dual conveyor. |
