| 00118526-01 | Additional mechanical PCB alignment for S-27 HM single conveyor:
with this option PCBs with a length/width ratio >2/1 can be
transported with the small side at the single conveyor belts into
the placement area. This option is only available for single
conveyor. |
| 00118528-01 | Long Board Support for SIPLACE S-27 HM Single Conveyor: this Option
supports PCBs up to a size of 610mm x 460mm (24 inch x 18 inch ).
This Option must be ordered per conveyor lane.This option can only
be used for single conveyor. Content: 2 supports long PCBs, 1
lifting table option SC. |
| 00119011-01 | Adapter device HS-xx changeover table with wheels version 2
(119022) for reel holder (item no:141204) of 3x8mm feeders (item
no:141098,141099). Not compatible to COT D4 119821. |
| 00119016-01 | Air filter box for SIPLACE HS-xx inclusive fan with increased power
and covers with filter mat. 1 package per machine required. This
package can be used for all machine types HS-50 and following. |
| 00119030-01 | Extension Cable (1.5m long) from external Power Supply to HS-xx/D4
feeder changeover table. |
| 00119160-01 | One set of nozzle changers for 12-Segment Collect and Place Head
HS-xx. A maximum of eight are possible for SIPLACE HS-xx. A maximum
of two for each gantry.Option includes: 4 nozzle changers with 5
magazines for 12 nozzles, 4 nozzle discarding devices. Station
software version from 501.xx, line computer software version
501.xx. |
| 00119161-01 | Nozzle changer for 12-Segment Collect and Place Head SIPLACE HS-xx.
A maximum of eight are possible for SIPLACE HS-xx. A maximum of two
for each gantry. Option includes: 5 magazines, each for 12 nozzles.
Station software version from 501.xx, line computer software
version from 501.xx. |
| 00119162-01 | Additional set of nozzle changers for 12-Segment Collect and Place
Head HS-xx. A maximum of eight are possible for SIPLACE HS-xx. A
maximum of two for each gantry. Option includes: 4 nozzle changers
with 5 magazines for 12 nozzles, 4 nozzle discarding devices, 1
SLIO-module. Station software version from 501.xx. |
| 00119185-02 | Retrofitting kit to 230/400V operating voltage for SIPLACE
HS-xx/D4. Delivery as a part of station free of charge. Attention:
If retrofitted at a customer a voltage savety check (DIN EN 60204)
is necessary. For assistance plese ask SIPLACE SMT Service. SIPLACE
expert with special tools highly recommended, risk of damage and
warranty losses Voltage test required |
| 00119405-01 | Long Board Option for SIPLACE HS-50: with this Option we can handle
pcb's up to 610mm x 460mm (24 inch x 18 inch) in the single
conveyor mode. This option can be used for single and dual conveyor
systems. |
| 00119610S02 | The Feeder Protection consists of a cover over the feed area
(119622,119755). If a feeder is pressed up or if feeder flaps are
projecting upwards, the EMERGENCY OFF is actuated. The option
contains one protection plate, which can be installed in location 2
or 4. |
| 00119618S02 | CO camera, stationary P+P (type 20) 8x8 |
| 00119633S02 | The Feeder Protection consists of a cover over the feed area
(119622,119755). If a feeder is pressed up or if feeder flaps are
projecting upwards, the EMERGENCY OFF is actuated. The option
contains one protection plate, which can be installed in location 1
or 3. |
| 00119665-01 | The 12-Segment Collect and Place Head Re-Configuration Kit is
necessary to exchange the actual Placement Head of the SIPLACE HF
and HF/3 (119600 and 119650) Placement Machine with Head
Modularity, in a 12-Segment Collect and Place Head. The Kit
includes: 12-Segment Collect and Place Head, Set Nozzles, Set
Sleeves, Cover, Head Servo Cards, Head Adapter board, Cables,
additional parts, Tools for Head exchange, Box for replaced Head
and a Technical Manual. With this kit the Head exchange can be
performed by trained service personnel at customer side within 8
hours. If required the automatic nozzle changer for the 12-Segment
Collect and Place Head has to be ordered separately. SIPLACE expert
with special tools highly recommended, risk of damage and warranty
losses |
| 00119666-01 | The 6-Segment Collect and Place Head Re-Configuration Kit is
necessary to exchange the actual Placement Head of the SIPLACE HF
and HF/3 (119600 and 119650) Placement Machine with Head
Modularity, in a 6-Segment Collect and Place Head. The Kit
includes: 6-Segment Collect and Place Head, Set Nozzles, Set
Sleeves, Cover, Head Servo Cards, Head Adapter board, Cables,
additional parts, Tools for Head exchange, Box for replaced Head
and a Technical Manual. With this kit the Head exchange can be
performed by trained service personnel at customer side within 8
hours. If required the automatic nozzle changer for the 6-Segment
Collect and Place Head has to be ordered separately. SIPLACE expert
with special tools highly recommended, risk of damage and warranty
losses |
| 00119689-02 | PCB BARCODE READER 2D FOR S,F This scanner assembly is used
together with the mounting kit 00119442-01 (in SIPLACE S, F). |
| 00119718S02 | Additional high resolution, stationary component camera digital in
X-Series,D1,D3 machines for centering of FlipChips. With this head
a component range from 0.2mm x 0.2mm up to 16mm x 16mm can be
placed. The smallest ball diameter is 80um, the min. Lead / Ball
pitch 250um / 140um. |
| 00119720S01 | Package for placement of 0201 components (size 0.6mm x 0.3mm).
Suitable for SIPLACE X/D-Series (SCSW 605)equipped with the
12-Segment Collect and Place head. The Package includes: High
resolution camera (Exchange between standard digital component
camera. The standard digital component camera is then not part of
delivery), 24 x Nozzle type 906 oval tip,Component Sensor,
Reconfiguration Instructions for 0201 placement. A 0201 Paket is
essential for each placement head. In addition for the D-Series
(and X-Series equipped with S-Feeders) the special 3x8mm 0201
feeder module is necessary for any 0201 placement (item number:
141099).This item number can only be ordered in combination with
SIPLACE X/D-Series. It cannot be ordered seperately. |
| 00119721-01 | The Twin Head Re-Configuration Kit is necessary to exchange the
actual Placement Head of the SIPLACE X-Series/D3 (119700 / 119750 /
119780 / 119870) Placement Machine with Head Modularity, in a Twin
Head. The Kit includes: 2 Pick and Place Modules, Stationer
Component-Camera (Digital), a nozzle changer with 3 Dual Garage
Magazine and 1 Single Garage Magazine, Cover, Head Servo Cards,
Head Adapter board, Vision Controller, Cables, additional parts,
Tools for Head exchange, Box for replaced Head and a Technical
Manual. With this kit the Head Exchange can be performed by trained
service personnel at customer side within 8 hours. If required the
automatic nozzle changer for the 6 nozzle head has to be ordered
separately. The customer service isn not included in this price.
SIPLACE expert with special tools highly recommended, risk of
damage and warranty losses |
| 00119747-01 | Holder for Nozzle Changer TwinHead for MTC X-Ser. |
| 00119753-01 | The Re-Configuration Kit Highforce Head is necessary to exchange
the TwinHead of a placement machine of SIPLACE HF/X-Series by an
Highforce Head The Highforce Head is a modified TwinHead, which is
able to reach placement forces up to 30N (+/-15%) with SIPLACE
HF/D3/X-Series. The kit includes: two Highforce Pick and Place
Modules, servo-cards, additional parts, one software CD, tools for
head exchange, box for replaced head and a technical manual.
Customer service is not included. If the customer sends the used
TwinHead modules back to us, he will get a credit of 60% of the
original spare part price (03001095S03).Preconditions:Line software
Siplace Pro 2.1SP2 or higher, Station software 505.03 or higher. |
| 00119754-01 | The Re-Configuration Kit Highforce Twin Head is necessary to
exchange the Collect and Place Head of a placement machine of
SIPLACE X-Series by an Highforce TwinHead. The Highforce TwinHead
is a modified TwinHead, which is able to reach placement forces up
to 30N (+/-15%) with SIPLACE X-Series. The kit includes: two
Highforce Pick and Place Modules, one stationary camera system, one
nozzle changer with three standard magazines (dual garage) and one
magazine for customized nozzles, head protection cover,
servo-cards, head adaptor boards, cables, additional parts, one
software CD, tools for head exchange, box for replaced head and a
technical manual. Customer service is not included.
Preconditions:Line software Siplace Pro 4.1 or higher, Station
software 603.01 or higher. SIPLACE expert with special tools highly
recommended, risk of damage and warranty losses |
| 00119760-01 | The 12-Segment Collect and Place Head digital Re-Configuration Kit
is necessary to exchange the actual Placement Head of the SIPLACE
X-Series/D3 (119700,119750,119780,119870) Placement Machine with
Head Modularity, in a 12-Segment Collect and Place Head with
Digital Camera. The Kit includes: 12-Segment Collect and Place Head
digital, Set Nozzles, Set Sleeves, Cover, Head Servo Cards, Head
Adapter board, Cables, additional parts, Tools for Head exchange,
Box for replaced Head and a Technical Manual. With this kit the
Head exchange can be performed by trained service personnel at
customer side within 8 hours. If required the automatic nozzle
changer for the 12-Segment Collect and Place Head digital has to be
ordered separately. SIPLACE expert with special tools highly
recommended, risk of damage and warranty losses |
| 00119761-01 | The 6-Segment Collect and Place Head digital Re-Configuration Kit
is necessary to exchange the actual Placement Head of the SIPLACE
X-Series (119700,119750,119780) Placement Machine with Head
Modularity, in a 6-Segment Collect and Place Head with Digital
Camera. The Kit includes: 6-Segment Collect and Place Head digital,
Set Nozzles, Set Sleeves, Cover, Head Servo Cards, Head Adapter
board, Cables, additional parts, Tools for Head exchange, Box for
replaced Head and a Technical Manual. With this kit the Head
exchange can be performed by trained service personnel at customer
side within 8 hours. If required the automatic nozzle changer for
the 6-Segment Collect and Place Head digital has to be ordered
separately. SIPLACE expert with special tools highly recommended,
risk of damage and warranty losses |
| 00119762-01 | The 20-Segment Collect and Place Head digital Re-Configuration Kit
is necessary to exchange the actual Placement Head of the SIPLACE
X-Series (119700,119750,119780) Placement Machine with Head
Modularity, in a 20-Segment Collect and Place Head digital. The Kit
includes: 20-Segment Collect and Place Head, Set Nozzles, Head
Servo Cards, Head Adapter board, Cables, additional parts, Tools
for Head exchange, Box for replaced Head and a Technical Manual.
With this kit the Head exchange can be performed by trained service
personnel at customer side within 8 hours. If required the
automatic nozzle changer (119715/119716) for the 20-Segment Collect
and Place Head digital has to be ordered separately. Additional
recommended the Verify component reject bin (116848). Mandatory
required are Changeover Table X-Series (119722) and X-Feeder.
Attention: Not for SIPLACE X4i. SIPLACE expert with special tools
highly recommended, risk of damage and warranty losses |
| 00119775S01 | Package for placement of 0201 components (size 0.6mm x 0.3mm).
Suitable for SIPLACE D4i/D2i/D1i equipped with the 12-Segment
Collect and Place head. The Package includes: High resolution
camera (Exchange against standard digital component camera. The
standard digital component camera is then not part of the
delivery), 24 x Nozzles type 906 oval tip, Component Sensor,
Reconfiguration Instructions for 0201 placement. A 0201 package is
essential for each placement head. This item number can only be
ordered in combination with new SIPLACE Di-Series. It cannot be
ordered separately. Machine System requirement: Station Software
from 605.03 SP2 and SIPLACE Pro from Version 10.0 or higher. |
| 00119786-02 | vacuum pump install kit for X2,X3,X4 |
| 00119787-02 | Vacuum pump for X-series |
| 00119860-01 | The Reconfigurationkit C&P is neccessary to exchange the
6-Segment Collect and Place Head of the D1/D2 with a 12-Segment
Collect and Place Head. The Kit includes: 12-Segment Collect and
place Head, Component camera, Set Sleeves, Cover, Tools for Head
exchange, Box for replaced Head, Nozzles (Type 904) and a technical
manual for the head exchange. With this kit the Head exchange can
be performed by trained Service personal at customer side within 8
hours. If required, the automatic nozzle changer for the 12-Segment
Collect and place head has to be ordered seperatly. |
| 00119861-01 | The Reconfigurationkit C&P is neccessary to exchange the
12-Segment Collect and Place Head of the D1/D2 with a 6-Segment
Collect and Place Head. The Kit includes: 6-Segment Collect and
place Head, Component camera, Set Sleeves, Cover, Tools for Head
exchange, Box for replaced Head, Nozzles (Type 904) and a technical
manual for the head exchange. With this kit the Head exchange can
be performed by trained Service personal at customer side within 8
hours. If required, the automatic nozzle changer for the 6-Segment
Collect and place head has to be ordered seperatly. |
| 00119862-01 | The Adapter Kit SIPLACE D1 P&P Head is necessary to upgrade a
Siplace D1 machine with only a Collect & Place Head to a
SIPLACE D1 with an additional P&P Head. After the upgrade a
wider component range could be achieved, in detail for larger and
higher components. For more details regarding wider component range
and other technical points, please see the actual specification of
the SIPLACE D1. This adapter kit includes the Pick and Place
Module, Nozzle changer P &P which includes 2 dual magazines for
standard nozzles and 1 magazine for special nozzles, stationary
Component Camera (Type 36), Servo cards, electrical and pneumatic
connections, small parts and a technical manual. The retrofit time
for the machine of the hardware parts will be approx. 4 hours
(excluding additional effort on programming in SIPLACE Pro). |
| 00119863-01 | The Adapter Kit SIPLACE D1 C&P 6 Head is necessary to upgrade a
Siplace D1 machine with only a Pick & Place Head to a SIPLACE
D1 with an additional 6 Segment Collect & Place Head. After the
upgrade a wider component range could be archived and due to the
Collect & Place principle also a higher placement rate with
smaller components. For more details regarding higher performance
and wider component range, please see the specification of the
SIPLACE D1. This adapter kit includes the 6 Segment Collect &
Place Head, 12 Sleeves, Component Camera (Type 29), Servo cards,
electrical and pneumatic connections, small parts and a technical
manual. If required, the automatic nozzle changer for the 6 Segment
Collect & Place head has to be ordered separately (Item No.
119866). The retrofit time for the machine of the hardware parts
will be approx. 4 hours (excluding additional effort on programming
in SIPLACE Pro). |
| 00119864-01 | The Adapter Kit SIPLACE D1 C&P 12 Head is necessary to upgrade
a Siplace D1 machine with only a Pick & Place Head to a SIPLACE
D1 with an additional 12 Segment Collect & Place Head. After
the upgrade a wider component range could be achieved and due to
the Collect & Place principle also a higher placement rate with
smaller components. For more details regarding higher performance
and wider component range, please see the specification of the
SIPLACE D1. This adapter kit includes the 12 Segment Collect &
Place Head, 12 Sleeves, Standard Component Camera (Type 28), Servo
cards, electrical and pneumatic connections, small parts and a
technical manual. If required, the automatic nozzle changer for the
12 Segment Collect & Place head has to be ordered separately
(Item No. 119865). The retrofit time for the machine of the
hardware parts will be approx. 4 hours (excluding additional effort
on programming in SIPLACE Pro). |
| 00119920S01 | Package for placement of 01005 components (size 0.4mm x 0.2mm).
Suitable for the SIPLACE D4/D2/D1 equipped with the 12 Collect
& Place Head (DLM3). The component range will be from 01005 up
to the maximum of 16mm x 16mm. The package includes: 1 x High
resolution camera Type 38 (exchange against standard component
camera. The standard component camera is then not part of the
delivery), 12 x Nozzle 905, 3 x Low Force Sleeves, 1 x Assembly
instruction. Also included are shims for the component tables of
the SIPLACE D4. In addition the tape feeder module 3x8mm 01005
Comp. (Item number:176100) is necessary for 01005 feeding and has
to be ordered separately. Additional Low Force Sleeves could also
be ordered (Item number: 03054107-xx). For additional 0201
placement, a component sensor (item number: 118021) is mandatory.
The price for this 01005 package is only valid in combination with
a new D-Series Machine (D4/D2/D1). System requirement: Station
Software from 604 and SIPLACE Pro from Version 5.0. |
| 00119977-01 | PCI memory card for storing data for the function recovery
placement in SIPLACE X-series. One card per machine is required.
With the function recovery placement the placement of a PCB inside
SIPLACE X4i can be continued after power or system failure. |
| 00119992S01 | Option Smart Pin Support is required once for the SX1/2 single and
dual line per SX1/2. Prerequisit is transport type V2. This option
includes the pin picker and depending on table position and nozzle
changer configuration either a magzine L10 (119996) or Q10(119997).
Per transport lane 5 pins (119995) are included. Considering the
cofiguration list additional magazins and pins can be ordered. |
| 00119995S01 | 5 Standard Support Pins (type101) for the option Smart Pin Support.
Dependant on the magazine type 10 pins (L10,Q10) or 5 pins (W5) can
be accommodated. |
| 00120040-01 | ADJUSTING GAUGE COMPONENT CARRIAGE FOR HS180 |
| 00140113-01 | Solution to verify SIPLACE X-feeders on accuracy and functionality
and also to perform maintenance and simple parts replacement. The
package contains X-Feeder Care Station for electronic test of the
main feeder functionality, User manual, Feeder Service Manual,
specific tools. This offering in combination with a Feeder Care
Training enables customers to gain all expertise to ensure that
SIPLACE X-feeders are capable for production. |
| 00141070S02 | SIPLACE Tape feeder for 1 x 88mm tape, with electric drive and
cover tape storage bin, 4mm to 96mm feed increments, for SIPLACE F
and HF/X/D-Series. 3.5 feeder locations required per module. |
| 00141088S01 | Tape feeder module 3x8mm SL SIPLACE |
| 00141092S05 | Feeder module for 1 x 12mm or 1 x 16mm tape (reconfigurable), 4mm -
16mm feeding pitch with motorized drive and integrated cover foil
removal for SIPLACE 80S-15/20/F/F4, 1 feeder location required per
module From SW version 402.03 ( S-20/F4) or 9.02 |
| 00141093S05 | Feeder module for 1 x 24mm or 1 x 32mm tape (reconfigurable), 4 -
32mm feeding pitch with motorized drive and inte- grated cover foil
removal for SIPLACE 80 S15/20/F/F4/F5/S23HM, 1 feeder locations
required per module. From SW version 402.03 or 9.02 |
| 00141094S05 | Feeder module for 1 x 44mm tape 4 - 44mm feeding pitch with mo-
torized drive and integrated cover foil removal for SIPLACE 80F/F4.
2 feeder locations re- quired per module. From SW version 402.03 or
9.02 |
| 00141095S05 | Feeder module for 1 x 56mm tape 4 - 56mm feeding pitch with
motorized drive and integrated cover foil removal for SIPLACE
80F/F4 2,5 feeder locations required per module. From SW version
402.03 or 9.02 |
| 00141097S05 | Feeder module for 1x72mm S-tape 4 - 72mm feeding pitch with mo-
torized drive and integrated cover foil removal for SIPLACE 80
F/F4/F5 |
| 00141117S02 | Feeder with tape return mechanism for tantalum capacitor types E
for 1 x 12mm tape with electric motor and cover foil pick-up,
4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23
and SIPLACE 80 F/F4/F5 HM. |
| 00141118S02 | Feeder with tape return mechanism for tantalum capacitor types C/D
for 1 x 12mm tape with electric motor and cover foil pick-up,
4-16mm feeder pitch, for SIPLACE HS-50, SIPLACE 80 S-15/S-20/S-23
and SIPLACE 80 F/F4/F5 HM. |
| 00141193S01 | Feeder module for 1 x 24mm or 1 x 32mm tape (configurable),up to
25mm tape height,4mm/40mm feeding pitch, with motorized drive and
integrated cover foil removal,for SIPLACE. 1,5 feeder locations
required per module. From SW version V402.03. |
| 00141194S01 | Feeder module for 1 x 44mm tape,up to 25mm tape height,4mm/52mm
feeding pitch, with motorized drive and integrated cover foil
removal,for SIPLACE F and HF/X-Series. 2 feeder locations required
per module. From SW version V402.03 or V9.02. |
| 00141195S01 | Feeder module for 1 x 56mm tape,up to 25mm tape height,4mm/68mm
feeding pitch, with motorized drive and integrated cover foil
removal,for SIPLACE F and HF/X-Series. 2,5 feeder locations
required per module. From SW version V402.03 or V9.02. |
| 00141255-01 | Power Supply for SIPLACE Feeder Modules with S-interface (not for
X-feeders). |
| 00141269S02 | Tape Feeder Module 2x8mm X |
| 00141270S04 | Tape Feeder Module 8mm X for 1 x 8mm component tape, motorized
drive, cover foil storage and unique feeder ID for SIPLACE
X-Series. Feeder pitch sent automatically from the programming
system or set at feeder control panel. |
| 00141271S04 | Tape Feeder Module 12mm X |
| 00141272S06 | Tape Feeder Module 16mm X |
| 00141273S06 | Tape Feeder Module 24mm X for 1 x 24mm component tape, motorized
drive, cover foil storage and unique feeder ID for SIPLACE
X-Series. Feeder pitch sent automatically from the programming
system or set at feeder control panel. |
| 00141274S06 | Tape Feeder Module 32mm X for 1 x 32mm component tape, motorized
drive, cover foil storage and unique feeder ID for SIPLACE
X-Series. Feeder pitch sent automatically from the programming
system or set at feeder control panel. |
| 00141275S06 | Tape Feeder Module 44mm X for 1 x 44mm component tape, motorized
drive, cover foil storage and unique feeder ID for SIPLACE
X-Series. Feeder pitch sent automatically from the programming
system or set at feeder control panel. |
| 00141276S06 | Tape Feeder Module 56mm X for 1 x 56mm component tape, motorized
drive, cover foil storage and unique feeder ID for SIPLACE
X-Series. Feeder pitch sent automatically from the programming
system or set at feeder control panel. |
| 00141289S02 | Tape Feeder Mod. 2x8mmX w. Splice Sensor |
| 00141290S06 | Tape Feeder Mod. 8mm X w. Splice Sensor |
| 00141291S05 | Tape Feeder Module 12mm X with Splice Sensor for 1 x 12mm component
tape, motorized drive, cover foil storage and unique feeder ID for
SIPLACE X-Series. Feeder pitch sent automatically from the
programming system or set at feeder control panel. Attention:
Functionality of the splice sensor is only available with software
and hardware upgrade/exchange planned with SW 605 (Q-Package 2).
Until this time the function Splice Detection is deactivated and is
therefore no acceptance criteria. |
| 00141292S06 | Tape Feeder Mod. 16mm X w. Splice Sensor. |
| 00141293S06 | Tape Feeder Mod. 24mm X w. Splice Sensor. |
| 00141294S06 | Tape Feeder Mod. 32mm X w. Splice Sensor. |
| 00141295S06 | Tape Feeder Mod. 44mm X w. Splice Sensor. |
| 00141296S06 | Tape Feeder Mod. 56mm X w. Splice Sensor. |
| 00141297S06 | Tape Feeder Mod. 72mm X w. Splice Sensor. |
| 00141298S06 | Tape Feeder Mod. 88mm X w. Splice Sensor. |
