ICAO CE Waterproof LED Aviation Obstruction Light Medium Intensity

LED Medium-intensity Aviation Obstruction Light  AH-MI-A2
 
 
This LED Medium-intensity Aviation Obstruction Light flashing white color, designed for marking top of obstacle which height is more than 105meters.
Ultra high intensity CREE LED is used for the light source ensure the long life experience and good performance. Self-designed reflector is used to converge light, which could reach the standard light intensity with as less as the power consumption.
 
Compliance

l ICAO Annex 14 Volume 1, Seventh edition, 2016, table 6.3 Medium Intensity Type A Obstruction Light

l FAA L-865

l CAAC MH6012-2015 Aviation obstruction light, MH 5001—2013 Aerodrome technical standards
 
Features
Electrical

l CREE ultra high intensity LED as light source saving power consumption and maintenance than incandescent light or halogen lamp

l Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical

l Unique design and UV protected polycarbonate reflector for converging light

l UV protection Powder coated bright yellow color base make better visibility

l Base material is die casting aluminum which has strong corrosion resistance, Shock and Vibrations protection

l Special vent installed under base to make sure the air could go through but water is avoid, so that the whole light temperature won’t be high, to avoid the High pressure steam goes inside.
System design

l Built-in photocell for day/night operation(dusk to dawn operation)

l Surge and lightning protection

l GPS devide inside for flashing synchronously
 
Optional

l Dry contact Alarm output for remote monitoring

l Infrared LED for pilot using NVG

l IOT Monitoring
 
Application

l AH-MI-A2 medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is 105-150meter, and most time work with low /medium intensity lights installed on the lower place.

download AH-SA-B Solar Airfied Light.pdf

Anhang Technology is a speciallized enterprise focusing on reseach, production, sales and after-sales service of aviation obstruction light, aircraft warning light, helipad lighting, solar airfield lights, marine navigation lanterns. Our factory located in Shenzhen City, China and have more than 10 years manufacturing experience for clients from whole world. Our products are patented and also have passed CE, ICAO, ISO9001, etc. All aviation obstruction light, aircraft warning lights, helipad lighting, solar airfield lights are fully complied with standards of ICAO ( International Civil Aviation Organization), FAA (Federal Aviation Administration), CAAC ( Civil Aviation Administration of China ). All marine navigation lanterns are fully complied with standards of IALA (International Association of Lighthouse Authorities). Till now, we’ve got eight software copyright, nine design patent and two utility model patent.
Our products are widely used in Civil Airports, Helipads, Communication Towers, Factory, Power Plant Chimneys, Television Tower, Port, Bridges, and High-rise buildings, Buoy in sea, etc. Advanced technolgy like LED(light-emitting diode), Solar Clean Power, GSM SIM Card Monitoring, GPS Time Synchronization technology, Blutooth, Wireless Remote Control and etc. applied in our products. All material are UV protected and anti-corrosion and the lowest water proof is IP65 which is to make sure lights could be used outside for long time.