Double Led Aviation Obstruction Light for High Structures and Towers

This series of products can be used alone on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV),High Pole, Tower Crane, Wind Turbine, etc whose height is lower than 45m.When obstacle object is higher than 45m, this series of products can be used with Medium-intensity or high-intensity obstruction light to potentially hazardous obstructions to air traffic with a steady or flashing red safety light.

Key Words

Double Aviation light

Twin Obstruction light

Low intensity light

compliant with ICAO,FAA,CAAC

Main Parameter

Function

This product is the double light with Photocell. It can work at night and close during the day automatically by photocell. There are two lights. Main-standby way. One works, the other is for standby. When main light is broken, standby light can work automatically.

Advantages

1. PC material with good impact protection strength, thermal stability, high transmittance.
2. Bird spike against bird drop.
3. International-advanced cold LED with low power consumption, high brightness and service life of light source reaching 100000hours.
4. LED based on obstruction light last 15 times longer than traditional light source, incandescent light.
5. About 96% less power than 116W incandescent light.
6. Major Maintenance Cost Saving, Surge protection device inside light.
7. Strong corrosion resistance, Shock and Vibrations protection and UV protection.
8. Dawn to Dusk operating: Built-in photocell can let light work automatically at night, closed during the day.
9. Free maintenance and 3/4 inch or 1inch installation size being suitable for flag-pole or tower installation way.
10. There is one switch converting between Flasing mode and Steady-burning mode.
11. Five Years Warranty Period.

Compliance

Low-intensity Type A or Type B FAA L-810
Low Intensity Double Obstruction Light, ICAO Annex 14 Volume 1,'Aerodrome Design and Operations’ Forth edition July 2004,table6.3

Product Picture