Anodized Mirror Polished Aluminum Profile For Kitchen Cabinet Wire

Anodized Mirror Aluminum Extrusion For Kitchen Cabinet Wire Polished Aluminum Profiles

Method of  Polishing Aluminum:

1. Mechanical Polishing:
The main purpose of this paper is to use polishing wheel coated with polishing wax to process the surface of aluminum alloy shell, which can reduce the roughness of the surface of aluminum alloy shell, make the surface smooth, obtain bright or mirror effect, and effectively repair the scratch and scratch of the surface of aluminum alloy shell.
2. Electropolishing:
Electrolytic polishing is used to immerse the electrolytic bath with chemical reaction as anode and insoluble metal as cathode. The anodized alumina is dissolved by DC, and the alumina disappears from the aluminum profile shell to restore luster.
3. Chemical Polishing:
Chemical polishing can be used as the pretreatment process of protective decorative plating, or as the pretreatment process of chemical film forming such as phosphating hair blue. If the solution of antirust passivation agent is immersed before painting, the aluminum oxide on the surface of the aluminum profile shell can be eliminated.
4. Ultrasonic Polishing:
Ultrasonic polishing is a kind of processing method which uses tool section as ultrasonic vibration and polishing brittle hard material by abrasive suspension. The workpiece is put into the abrasive suspension and put in the ultrasonic field together. Depending on the vibration of ultrasonic, the abrasive can be ground and polished on the surface of the workpiece.
5. Fluid Polishing
Fluid polishing technology needs to rely on the flowing liquid and the abrasive particles carried by it to wash the surface of the workpiece to achieve the purpose of polishing. Hydrodynamic grinding is driven by hydraulic pressure. The medium is mainly made of special compound with good fluidity under low pressure and mixed with abrasive. Silicon carbide powder can be used as abrasive.

Profile Details:

Different Dluminum Surface Treatments:

Wire drawing process refers to repeatedly grinding and scraping the surface of aluminum alloy with sandpaper until lines are scraped. There are many kinds of wire drawing. After wire drawing process, the surface of aluminum profile can see each line very clearly. At the same time, the metal matte of aluminum profile products will show fine hair luster, which makes aluminum profile more fashionable and scientific.

Wire drawing can eliminate the scratch, scratch and machining knife mark of aluminum profile. The degree of elimination is related to the depth of wire drawing. Generally speaking, the greater the depth of wire drawing, the stronger the ability to eliminate the defects on the surface of aluminum profile. However, for wire drawing treatment with high requirements, pre-treatment such as polishing or polishing shall be used to eliminate the surface defects of the workpiece in advance before wire drawing, especially for shallow fine wires.

In addition to eliminating the defects on the surface of aluminum profiles, wire drawing plays a more important role in improving the texture of metal materials and providing good decorative effect for aluminum profiles to increase the beauty of products, which is also a commonly used treatment method at present.

Aluminum profile surface wire drawing is carried out by wire drawing machine. For small plane workpieces, flat pressing sand belt wire drawing machine can be used. According to the different surface requirements of products, coarse-grained sand belt can be selected to process rough and obvious hand feel silk lines, or fine-grained sand belt can be selected to process more delicate silk lines. For small workpieces, a more simple texturing machine can also be used, and the thickness of the wire can also be controlled according to the particle size of the grinding block. For large workpieces or plates, roller brush wire drawing or wide abrasive belt wire drawing can also be used.

Mechanical Polishing:

Electropolishing is commonly used in the decorative processing of steel, aluminum, copper and other parts, or copper nickel and other coatings,

Electropolishing can be used to replace heavy mechanical polishing, especially for its complicated shape and difficult to add by mechanical method

But electropolishing can not remove the non-metallic inclusions in the gold, nor can it remove or mask the metal

Surface defects such as scratches and deep pockmarks on the surface. In multiphase alloys, when one phase is not easy to dissolve in the anode, it will shadow

The quality of electropolishing. Chemical polishing is the chemical etching of metal parts under specific conditions. After this etching

During the process, the metal surface is etched and leveled by solution to obtain a brighter surface

Chemical polishing can be used in the manufacture of instruments, aluminum mirrors, and other parts and coatings

Compared with electropolishing, the advantages of chemical polishing are: no external power supply is needed, and the shape can be processed more easily

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.