Anodized Aluminum Window Profiles Heat Treatable For Decoration / Building

Anodized Aluminum Profiles,Sliding Door and Window Frames

Specifiaction of High Quality Aluminum Profile:

Certificate

1: Guangdong famous brand

2: The ISO9001 quality management system certification

3: ISO14001 environmental management system certification

4: OHSMS18001 occupational health and safety management system certification,etc.

Characteristics

Corrosion resistance

The density of aluminum profiles is only 2.7 g/cm3, which is about a third of the density of steel, copper or brass (7.83 g/cm3, 8.93 g/cm3). In most environmental conditions, including air, water (or brine), petroleum chemistry, and many chemical systems, aluminum shows excellent resistance to corrosion.

Electrical conductivity

The aluminum profile is often chosen because of its excellent conductivity. On the basis of weight, aluminium is nearly twice as conductive as copper.

Thermal conductivity of rate

The thermal conductivity of aluminum alloy volume rate is about 50-60% of copper, the manufacturing heat exchangers, evaporators, heating appliances, cooking utensils, as well as the automobile cylinder head and radiator are favorable.

The ferromagnetic

The aluminum profile is non-ferromagnetic, which is an important feature for the electric and electronic industries. Aluminum profiles are not self-igniting, which is important for applications that involve loading and unloading or touching inflammable and explosive materials.

Can machine processability

The machinability of aluminium profile is excellent. In deformation and aluminum casting aluminum alloy, as well as in the alloy after output with the various states, the change of the machining features is quite big, this will require a special machine tool or technology.

formability

Specific tensile strength, yield strength, malleability, and corresponding processing hardening rate dictate the change in the amount of deformation allowed.

Recycling sex

Aluminum is extremely recyclable, and the properties of recycled aluminium are almost indistinguishable from native aluminum.

Aluminum knowledge

aluminum: aluminum and aluminum alloys are processed into a certain shape of materials, including sheet, strip, foil, tube, rod, wire, profile, etc.

casting aluminum alloy: aluminum alloy (ZL) is divided into four categories: silicon, copper, magnesium and zinc. The code codes are 100, 200, 300 and 400 respectively.

high strength aluminum alloy: high strength aluminum alloy refers to aluminum alloy whose tensile strength is greater than 480 MB. It is mainly of hard aluminum alloy, super hard aluminum alloy and casting alloy.

1. JIS A.A 1000 series - pure aluminum series

1, 1060, 1060, as a conductive material, IACS guarantees 61% and USES 6061 power lines when required

2, 1085, 1080, 1070, 1050 1 1085 1080 1070 1070 ─ n30 rational good formability, surface, its corrosion resistance in the aluminum alloy best. Because it is pure aluminum, its strength is low, the purity is higher its intensity is lower. Daily necessities, aluminum plates, lighting appliances, reflectors, decorative, chemical industrial containers, radiators, solution wiring, conductive materials

3. 11,200 11200 AL of general use aluminum with more than 99.0 % purity. The appearance of anodic oxidation treatment is slightly white and the same as above. General utensil, heat sink, bottle cap, printing plate, building materials, heat exchanger component 1N00 - strength is slightly higher than 1100, good shape, and the same characteristic is the same as 1100.