Customize Porcelain Aluminium Extruded Profiles 5.0mm Thickness

Aluminium Profile Aluminum Profiles Prices Factory Customize Aluminium Extruded Profile

Introduction of Porcelain Aluminum Profiles:

Aluminum itself has a layer of alumina film, which has certain corrosion resistance. However, this layer of alumina film will make the surface of aluminum profile lose its original luster. All aluminum alloy products generally need special oxidation treatment and oxidation coloring. It has the functions of corrosion resistance and wear resistance. The oxidation process includes degreasing (degreasing), alkali corrosion, anodizing, activation, dyeing and hole sealing

2, Secondary oxidation

Some characters on the surface of some electronic products are convex bright surface effect, which can be obtained by secondary oxidation and stamping.

3, Surface drawing

According to the needs of strong men on the surface of aluminum, several wire drawing effects such as straight line, random line, thread, ripple and spiral line can be made.

4, Sandblasting

In order to meet the needs of soft luster, sandblasting can be used to obtain the surface effect of film light hero or reflective surface. Surface sandblasting can eliminate the common defects on most aluminum surfaces.

5, Highlight

High gloss treatment is generally carried out on flat aluminum parts, and the effect of milling machine processing is carried out at the edges of aluminum parts and other places requiring conspicuous treatment.

6, Spraying and printing

There are two ways of spraying paint and powder, and printing includes silk screen printing and pad printing.

Product Details:

Design of Aluminum Windows:

Architectural design of doors and windows
Aluminum alloy doors and windows

Doors and windows are the building unit, the decorative symbol of facade effect, and finally reflect the characteristics of the building. Although different buildings have different requirements for the design of doors and windows, and the detailed division of doors and windows is ever-changing, some laws can be found.
1. The facade division of doors and windows shall conform to the aesthetic characteristics. The following factors shall be considered in the division design
(1) coordination of division proportion. For a single glass plate, the length width ratio should be close to the golden section ratio as far as possible. It should not be designed into a square and a narrow rectangle with a length width ratio of more than 1:2. The height of the leunder is generally 1 / 4 ~ 1 / 5 of the frame height, which should not be too large or too small;
(2) the facade division of doors and windows should not only have a certain law, but also reflect the change, and seek the law in the change; Density of grid lines; Equidistant and equidimensional division shows preciseness, solemnity and seriousness; Non equidistant free division shows rhythm, liveliness and movement;
(3) at least the horizontal grid lines of doors and windows in the same room and wall shall be on the same horizontal line as far as possible, and the vertical lines shall be aligned as far as possible;
(4) when designing the facade of doors and windows, the overall effect requirements of the building shall be considered, such as the contrast between virtual and real buildings, light and shadow effect, symmetry, etc.
2. Selection of door and window colors (including the colors of glass and profiles)
The color matching of doors and windows is an important part that affects the final effect of the building. The color of doors and windows should be matched with the architectural characteristics. When determining the color, it should be jointly agreed with the architectural designer, the owner and other parties.

Multi Surfaces:

Characteristics and properties of aluminum profiles after various surface treatment processes
Frosted fabric aluminum profile: frosted surface aluminum profile avoids the disadvantage that bright aluminum alloy profile will form light interference under certain environment and conditions in architectural decoration. Its surface is as delicate and soft as brocade, which is very favored by the market. However, the existing frosted material must overcome the uneven sand particles on the surface and see the deficiency of pattern pattern.
Multi tone surface treatment aluminum profiles: the monotonous silver white and tan color can no longer meet the good cooperation between architects and exterior wall decorative tiles and exterior wall latex. The new stainless steel color, champagne color, golden yellow, titanium gold, red series (wine red, jujube red, black, purple) and colored glass can add icing on the cake to the decorative effect. These profiles must be chemically or mechanically polished and then oxidized for good results.
Electrophoretic painted aluminum profiles: electrophoretic painted profiles have soft surface gloss and can resist the erosion of cement and mortar acid rain. 90% of aluminum profiles in Japan have been electrophoretic painted.
Powder electrostatic spraying aluminum profile: powder electrostatic spraying profile is characterized by excellent corrosion resistance, acid, alkali and salt spray resistance, which is much better than oxidation coloring profile.
Plasma enhanced electrochemical surface ceramic aluminum profile: this type of material is the most advanced treatment technology in the world. The product quality of this profile is excellent, but the cost is high. It has more than 20 colors. Its biggest feature is that it can be colored like printed cloth as needed. The surface of the profile is colorful and the decorative effect is excellent.

Photos:

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium profiles?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.