Colourful Powder Coated Aluminium Extrusions Lenth Or Shape Customized

Powder coating Aluminium Profile , Colourful , Lenth Or Shape Customize

1.Introduction

    Powder spraying is used to spray powder coating on the surface of the workpiece by spraying powder equipment (electrostatic spray plastic machine). In electrostatic action, the powder will be evenly adsorbed on the surface of the workpiece to form a powdery coating; the powder coating is solidified by high temperature baking and becomes the final coating of different effect (different kinds of powder coating effect) The powder spraying effect is superior to the spray painting process in terms of mechanical strength, adhesion, corrosion resistance and aging resistance, and the cost is also under the same effect of spray painting.

    The coating is mixed with special resin, pigments, fillers, curing agents and other auxiliaries in a certain proportion, and is prepared by hot extrusion and crushing and screening. At normal temperature, they are stable in storage, by electrostatic spraying, friction spraying (thermosetting) or fluidized bed soaking (thermoplastic), and reheating the curing and curing to make a smooth and bright permanent coating to achieve the purpose of decoration and corrosion protection.

Powder coating Aluminium Profile , Colourful , Lenth Or Shape Customize

2.Features

    1.High Efficiency: Because It Is Disposable Membrane, It Can Increase Productivity 30-40%

    2.Save Energy: Reduce Energy Consumption By About 30%.

    3.Less Pollution: No Organic Solvent Volatilization (Not Containing Toluene, Xylene And Other Harmful Gases In Paint). 

    4. The Coating Utilization Rate Is High: Up To 95%, And The Powder Can Be Used Repeatedly After Recovery.

    5. Film Performance Is Good: Disposable Film Thickness Can Reach 50-80 M, Its Adhesion, Corrosion Resistance And Other Comprehensive Indicators Are Better Than The Paint Process.

    6. Finished Product Rate Is High: Before Curing, It Can Carry Out Two Times Re Injection. There Are Many Kinds Of Powder Coating Process, And There Are Two Kinds Of Electrostatic Powder Spraying And Plastic Dipping.

    Powder Coating Is A New Type Of Solid Powder Coating Without Solvent 100%. It Has The Characteristics Of No Solvent, No Pollution, Energy And Resources Saving, Labor Intensity Reduction And Mechanical Strength Of Coating Film.

Powder coating Aluminium Profile , Colourful , Lenth Or Shape Customize

4.Tips:

  1.keep away from fire sources and avoid direct sunlight, should be placed in a well ventilated place below 35 C.

  2. Avoid storage in places where water, organic solvents, oil and other materials are contaminated.

  3. Powder coating should not be exposed to the air at any time, should be stamped at any time or tighten the bag to avoid debris mixing.

  4. Avoid long term contact with skin. Apply powder to soap and rinse water. Do not use solvent. The safety of the construction site

  5. Painting equipment should be well grounded to eliminate static electricity.

  6. Avoid the phenomenon of unprovoked discharge of the coating machine

  7. In the powder spraying room, the concentration of the floating dust should be controlled below the safe concentration as far as possible so as to avoid the danger of dust explosion.

Please tell us the information below, and we will give the best suggestion to you!

1. Where you intend to use the aluminium profiles?
2. If you have the estrusion drawing, send us and we develop the correspondence mold.
3. Which color you want or tell us the architectural style you like.
4. Purchase quantity. It will convenient us to give you the best price.

                   Choose us & contact us!