3.5*2.2m Permanent Metal Steel Frame Bamboo Board Horse Stable Box Horse Stall Fronts

Mobile High Quality Cheap Horse Stable Front Panels Carbonized

Description:

Standing or tie stalls need to be wide enough for a horse to lie down in comfortably. Depending on the size of the horse, they should be at least 4ft to 5ft (1.5m) wide and 8ft (2.4m) long. There is usually a manger for hay at the front of a standing stall, so the width of this should be considered. A pony will need a shorter and narrower standing stall than a larger draft breed, which again will need more space.

There will also need to be a sturdy structure to tie to. It should be high enough so the horse cannot get its leg over the tie rope, but still be able to reach feed and water.

In both standing and box stalls, the walls should be solid, sturdy lumber to at least 4.6ft (1.4m) high, and above that, grill or sturdy mesh so that horses can see each other. This also helps with ventilation and light.

4. Stall doors can be either swinging or sliding. In either case, there should be latches that undo easily, but that horses cannot tamper with. Many stall Houdinis have escaped and let out a few friends for an overnight stable ransacking. That ends up a clean-up headache for the owner, as well as a possible safety and health hazard for the horses.

Swinging doors should open out into the alley, and be kept shut at all other times. They should fasten securely shut so horses don't escape. Sliding doors should slide smoothly. Grain room doors should be locked. Doors should be at least 4 ft (1.2m) wide.

a. Resistant to change of position or condition; not easily moved or disturbed: a house built on stable ground; a stable platform.

b. Not subject to sudden or extreme change or fluctuation: a stable economy; a stable currency.

c. Maintaining equilibrium; self-restoring: a stable aircraft.

An 7.2-foot-high stall partition is standard. Partition height needs to be at least 7 1/2 feet to prevent horses from getting legs over the wall. Most horses can kick as high as 7 feet. Although this is not often seen in stables. Stall door manufacturers typically supply a doorway opening of slightly over 7 feet with a 42- to 45-inch width. These are the dimensions of the actual open area that the horse can pass through. These smaller doorway openings are adequate for horse and handler safety.

Horse barns are commonly built with a ceiling height of 10 to 12 feet with 8 feet being the minimum. A low ceiling not only inhibits air circulation, but also increases the chance that a horse may strike its head. In fact, many stables have open truss or rafter construction with no ceiling. In this case, the minimum height is the clearance to the lowest item on which a horse may strike its head, such as a light fixture or truss bottom chord.

Quick Detail:

Specification

 product style  
  
   

 Accessories  
  
Company Profile