3M Length Plaster Angle Bead
|
|
3M Length Contruction Plaster Angle Bead 7cm Wing Is Used To Provide Strong Corner Reinforcement
Plaster Angle Bead is used to provide strong corner reinforcement for conventional plaster applications. This type the wing is 7cm.A solid metal nose of angle bead provides a straight, rigid ground for screeding and the angle bead flanges can be flexed easily over irregular, uneven surfaces. Plaster keys near the solid nose provide increased reinforcement where needed and ensures straight corners
Material: Galvanized Sheet
Specification:
Wing Width :70mm Thickness: 0.3mm,0.35mm Length: 2-3m
Applications: Using this sheet is very quick and simple by applying plaster dabs
to the wall at both sides of the corner at approximately 600mm
intervals. The bead is then placed against the corner and the mesh
wings are then firmly placed in to the dabs of plaster resulting in
the bead being set firmly and projecting sufficiently to the
required thickness of the plaster on both sides of the corner. The
corner of the bricks is fixed by using galvanized nails or wire
tying. Featur 1) It gives a true and straight corner. 2) Provides strength to the corner 3) Impact resistant, anti-bumping, antiseptic, antibiotic, and multi-color 4) Simply fasten it to the wall, and you are ready to do the mud work 5) Style: as per your requirements
|
| Product Tags: smooth plaster angle bead 3m anti bumping plaster angle bead 3m mud work plaster angle bead 3m |
