3cm Wing Drywall Plaster Angle Bead 2-3m Length For Construction
|
|
3cm Wing Drywall Plaster Angle Bead 2-3m Length For Construction
Plaster Angle Bead is made of the hot galvanized sheet.We can produce the Wing:3cm,5cm,6cm,7cm.This raw material does not rust easily . It is used to provide strong corner reinforcement for conventional plaster applications. A solid metal nose of angle bead provides a straight, rigid ground for screeding and the angle bead flanges can be flexed easily over irregular, uneven surfaces. Plaster keys near the solid nose provide increased reinforcement where needed and ensures straight corners
Material: Galvanized Sheet
Specification:
Wing Width :30mm Thickness:0.3mm,0.35mm Length:2-3m
Applications: Using this sheet is very quick and simple by applying plaster dabs
to the wall at both sides of the corner at approximately 600mm
intervals. The bead is then placed against the corner and the mesh
wings are then firmly placed in to the dabs of plaster resulting in
the bead being set firmly and projecting sufficiently to the
required thickness of the plaster on both sides of the corner. The
corner of the bricks is fixed by using galvanized nails or wire
tying. Feature 1) It gives a true and straight corner. 2) Provides strength to the corner 3) Impact resistant, anti-bumping, antiseptic, antibiotic, and multi-color 4) Simply fasten it to the wall, and you are ready to do the mud work 5) Style: as per your requirements
|
| Product Tags: galvanized angle bead plastering metal corner bead |
