32mm Wing 3*10mm Hole 4mm Reinforce Flange Angled Drywall Corner Bead
|
0.45mmThickness 32mm Wing Aluminium Angle Bead 3*10mm Hole 4mm Reinforce Flange Aluminium Angle Bead is made of 3003.We could produce the thickness 0.4 and 0.45mm.It has a smooth round nose bead with diamond mesh wings for the keying of plaster right up to the nose of the bead. On the outside is the finished edge which is where one side of your drywall knife runs on when you are applying drywall mud. The two flanges sit flat on your raw drywall. The diamond decoration along the length of the flange act as a keyway for holding the drywall mud to the drywall and the corner. This mesh insures a perfect bond and provides effective reinforcement where most needed. Straight edge nose is easy to install and permits plumb straight outside corners. Excellent protection for corridor corners exposed to traffic.
Aluminium Angle Bead with Reinforce Flange
Hole: 3*10mm Reinforce flange: 4mm as photo.
|
||||||||
Product Tags: anti rust angled drywall corner bead 3003 plate angled drywall corner bead aluminium plate 3003 angle corner bead |
Drywall Round Nose Aluminium Angle Bead Metal With Diamond Mesh Wings |
2.7m Length Peforated Metal Plaster Beads Aluminium 2cm Wing |
3cm Wing Aluminium Angle Bead Strong Corner Reinforcement 2m Length |
32mm Wing Drywall Reinforce Aluminum Angle Bead 2.7m Length |
0.45mm Thickness Aluminium Angle Bead , Expanded Metal Corner Plaster Beads |
Aluminium Alloy Grade 3003 Drywall Metal Angle Bead Expanded With Reinforced Flange |