Galvanized Brickwork Reinforcement Mesh Coil Mesh Expand Mesh
|
|
Specification:
Hole Type: Diamond Hole Size: 12*25mm width: 10cm, 15cm, 20cm Length: 10m-100m packing:by carton or Pallet
How to Install Brickwork Reinforcement Mesh: The coil mesh is laid in strips between brick or block courses leaving approximately 25mm clearance from the faces of the work. Where coil mesh joins are required, ensure they overlap by at least 75mm. The reinforcement is then simply embedded in the mortar for the next course. In most instances, application every third course, for the full length of the wall, will be sufficient. To reinforce brickwork at an opening, e.g. window or door, mesh should be installed to overlap part of the opening, and part of the solid wall. Thinking of the width of the opening, lay the mesh approximately a quarter of the way across the opening. The mesh should lie the same distance again, across the solid wall. Above windows or doors, install Catnic mesh for 2-3 courses, starting from the course above the lintel
|
||||||||||
| Product Tags: masonry reinforcement mesh brick reinforcing coil |
|
0.35mm Thickness Galvanized Brickwork Reinforcement Mesh 114mm Width |
|
18 Rolls Per Carton Mesh For Brick Wall Galvanized 20cm Width |
|
480g/M2 Galvanized Brickwork Reinforcement Mesh Diamond 100m Length |
|
6.5cm Width Brick Wall Reinforcement Mesh Anti Cracking 280g/M2 |
|
15m Length Brickwork Reinforcement Mesh Galvanized Anti Cracking 10cm Width |
|
0.35mm Thickness Galvanized Diamond Hole Brickwork Reinforcement Mesh |