KOREA 20MPa Hydraulic Breaker Diaphragm For BRH125 Hydraulic Hammer Membrane

KOREA 20MPa Hydraulic Breaker Diaphragm For BRH125 Hydraulic Hammer Membrane

1. Product Description
 

Product Name: BRH-125 Rubber Diaphragm

【Product Features】
1. High-quality materials: BRH-125 rubber diaphragm is made of high-quality rubber material, ensuring the durability and reliability of the product.
2. Versatility: Suitable for a variety of industrial and household equipment, including pumps, valves and other occasions where diaphragms are required.
3. Temperature resistance: Able to withstand a certain range of temperature changes and adapt to different working environments.
4. Accurate size: Precise size design ensures a perfect match with your equipment.

【Installation Guide】
1. Before installation, please confirm that the size of the diaphragm is compatible with your equipment.
2. Clean the diaphragm installation area of ​​the equipment to ensure that there are no impurities or debris.
3. Place the diaphragm flat in the designated position and fix it according to the instructions of the equipment manufacturer.
4. Use appropriate tools and methods to tighten the diaphragm to avoid damage caused by over-tightening.
5. Check whether the diaphragm is installed correctly without any distortion or stretching.

【Precautions for use】
1. Do not exceed the temperature and pressure range specified for the product.
2. Check the condition of the diaphragm regularly. If cracks, wear or other damage are found, please replace it in time.
3. Avoid using sharp tools to touch the diaphragm to avoid scratches or perforations.
4. Store in a dry, cool place away from direct sunlight and chemical contamination.

【Maintenance and Care】
1. Clean the surface of the diaphragm regularly to keep it clean and free of dirt.
2. If the diaphragm is used in equipment that contacts food or drinking water, please use a cleaning agent that meets hygiene standards.
3. Follow the equipment manufacturer's maintenance plan and replace the diaphragm regularly to ensure optimal performance of the equipment.

Thank you again for choosing the BRH-125 rubber diaphragm. I hope this product can bring you a satisfactory experience.

2. Product characteristics

​ 1. Speed = >hammer mechanical movement speed is high, the lubriion oil film may be destroyed, because of not good lubriion and friction heating oil seal, cause life is greatly reduced, we use polyurethane or rubber oil seal at 0.03 m/s ~ 0.8 m/s speed within the scope of work is good
2. The temperature= > low temperature will lower the elasticity of polyurethane or rubber seal, cause leaks, and even the entire oil seal becomes hard and brittle. High temperature can make oil seal volume expansion, soft, cause movement oil seal friction resistance increase rapidly and reduce the compression capacity. Suggest polyurethane or rubber oil seal work continuously - 10 ℃ ~ + 80 ℃ temperature range.
3. Should= > consider when pressure = "high pressure oil seal compression deformation, repellent extrusion ring, groove processing aspect also have special requirements. For get together ammoniac fat sealing the best working pressure in the range of 2.5 ~ 31.5 MPa.
4. Load=>Oil cylinder can bear larger load, seal and bearing ring in a completely different role, suggest polyurethane sealing ring to ensure that the cylinder can bear larger load

 

The characteristics of different material PU
 

3. MODELS REFERENCE
 

4.   picture viewing

5. SELLS LIST

Valve Pusher Floating oil seal Bushing hydraulic cylinder seals cylinder seal kits
 

6.  FAQ