RAL1016 sulfur yellow color pure polyester non-TGIC powder coating
with outstanding gloss retention
polyester TGIC powder coatings will provide good edge cover when
sharp edges are present, due to the inherent higher melt
viscosities of TGIC-based coatings, which may also increase surface
roughness (orange peel). Over-bake color stability of TGIC-based
coatings is excellent.
Although adhesion and corrosion resistance properties are similar
to polyester urethane coatings, chemical and solvent resistance may
be somewhat reduced.
Application
Suitable for all kinds of products such as household appliances,
instruments, meters medical devices,
automotive components, metal furniture, fitness equipment, indoor
decorative painting, etc.
Also apply to a variety of equipment, pipes, pipe fittings and
other requirements of corrosion coating.
Specification
Inspection Item |
Test Standard or Method
| Test Indicator |
| Type A | Type B,C |
| Impact resistance | ISO6272 | GB/T1732-1993 | 40cm | 50cm |
| Cupping test | ISO1520 | GB/T9753-1988 | 5mm | 8mm |
Adhesion
(Planning grid method) | ISO2409 | GB/T9286-1998 | Grade 0 |
| Crook | ISO1519 | GB/T6742-1986 | 3mm | 2mm |
| Pencil hardness | ASTMD3363 | GB/T6739-1996 | 1H-2H |
| Salt test | ISO7253 | GB/T1771-1991 | > 500 hours |
| Heat test | ISO6270 | GB/T1740-1979 | > 1000 hours |
| Heat resistance | 100°C/24 hours (white) | Paul Light character (best) |
Remark | Proportion : 1.2-1.8 (depending on the color and gloss ) .
Particle size distribution: 100% less than 100 microns |
Average coverage:
8-10m³/kg, the membrane is 60μm (calculate by 100%
utilization rate of powder coating).
Delivery
| BY courier | TNT, DHL, UPS, 4-8 days |
| BY air | Usually 3-4 days |
| BY truck | Usually 10-15 days to arrive |
