GE FANUC IC693CPU311 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER

GE FANUC IC693CPU311 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER 

Technical Specifications for IC693CPU311

Manufacturer GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc; Emerson Automation (Current)
Series Series 90-30
Product Description Embedded CPU baseplate
Part Number IC693CPU311
Series Series 90-30
Part Number IC693CPU311
Product Type Baseplate with Built-In CPU
No. of I/O slots Five (5)
Product Description Baseplate with embedded CPU
No. of Power supply slots One (1)
Number of Slots 5
Clock Speed 10 MHz
Expansion baseplate slot None
Memory Capacity 6 KB of User Program Memory
Operating Temperature 32 to 140 degrees Fahrenheit
User memory 6 Kbytes
User Memory 6 Kbytes
Processor type 80188
Boolean Execution speed 18 ms per 1K logic

Number of Serial Ports 1
Analog Outputs - %AQ 32 Words
Typical scan rate 18 ms per 1K of Boolean logic
Current Load 410 Milliamps
Timers / Counters 170
Processor speeds 10 MHz
CPU Processor Speed 10 MegaHertz
Communication Ports One (1) SNP Ports hosted by the Power Supply module
Expandable None
Product Lifecycle Status* Discontinued/Obsolete
Discrete Input Points - %I 160
Interrupts No
Discrete Output Points - %Q 160
Shift register Yes
Analog Inputs - %AI 64 Words
Analog Outputs - %AQ 32 words
Built-in Serial Ports 1 (uses connector on PLC power supply). Supports SNP slave and SNP-X slave protocols
Current load: 410 mA
Bus voltage: +5VDC

About IC693CPU311

 Embedded timer and counter instructions available to the embedded processor are up to 170 and support Shift Register instruction as well. This baseplate is also provided with a non-volatile EPROM or EEPROM slot which is intended for memory expansion. The embedded CPU does not come with an integrated port instead, the communication interface is hosted by the power supply module which is a single SNP slave and SNP-X slave protocol compatible port. Optional communication protocols supported by this module are Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules.

The GE Fanuc Series 90-30 IC693CPU311 baseplate is a special baseplate that has 5 slots with a CPU built right in. The IC693CPU311 5-slot baseplate with a built-in CPU has 6 KB of user program memory. This special baseplate is a useful part for many Series 90-30 PLCs, but it is not compatible with every PLC component from the GE Series 90-30 product line. For example, the IC693CPU311 baseplate cannot accommodate the Series 90-30 PCM and CCM devices. This baseplate also does not have a battery-backed clock, interrupt, or override features. However, some of the features that the IC693CPU311 5-slot baseplate with a built-in CPU comes with features like shift registers, 170 timers or counters, and 1 built-in serial port.

The GE Fanuc Series 90-30 IC693CPU311 5-slot baseplate can support RAM and optional EPROM and EEPROM as its memory options. This baseplate and its CPU can communicate through multidrop LAN, Profibus, FIP, Ethernet, GBC, GCM, and GCM+ optional communication modules. Its typical scan rate is 18 milliseconds for every 1K of logic with the boolean contacts and its CPU processor speed is 10 MegaHertz. The IC693CPU311 5-slot baseplate needs 410 milliamps of current load from a 5 Volts DC rated power supply to operate. It can operate within a temperature range of 32 to 140 degrees Fahrenheit or 0 to 60 degrees Celsius. The built-in serial port on this baseplate can support both the SNP slave protocol and the SNP-X slave protocol. This port uses a connector on the PLC’s power supply module.

Introduction of Wisdomlong Technology CO.,LTD

Terms

1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Shipping

1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.

FAQ