GE FANUC IC693CMM311 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER

GE FANUC IC693CMM311 SERIES 90-30 PROGRAMMABLE LOGIC CONTROLLER 

Technical Specifications for IC693CMM311

Manufacturer GE Fanuc
Series Series 90-30
Manufacturer GE Fanuc / Emerson Automation
Product Description Communication Coprocessor Module (CCM)
Part Number IC693CMM311
Series Series 90-30
Communication interfaces Port 1: RS232 Port 2: Rs232 / RS485
Product Type Communications Coprocessor Module
Part Number IC693CMM311
Communication cable: IC693CBL305 Wye cable
Supported Protocol: SNP, Modbus RTU; CMM
Product Description Genius communication module
Compatible Devices Modular GE Series 90-30 CPUs
No. of CMM modules: Four (4) modules
Embedded CPUs Not Compatible
Slot width Single slot
Module width: Single slot
Slot assignment Any slot except CPU slot
Number of Serial Ports 2

Mounting Baseplate mounted
Mounting location Series 90-30 CPU baseplate
RS-232 Applications Supported
Module Location CPU baseplate only
RS-485 Applications Supported (Port 2 only)
Status LED indicators Module OK; PORT1; PORT2
Connection standard: Port 1: RS232 Port 2: RS232 / RS422/RS485
LED indicators: Module OK; US1; US2
Current load: 400 mA
Product Lifecycle Status* Discontinued/Obsolete
Port connections 25-pin D-shell, female ports
Bus voltage: +5VDC
Supported protocols: CCM / RTU / SNP
Communication speed 300, 600, 1200, 240, 4800, 9600 and 19200 Baud rate

Pre-assembled cable IC693CBL305
No. of CMM module per baseplate 4
Backplane current draw 400 mA at 5VDC

About IC693CMM311

The IC693CMM311 is a communications coprocessor module from the Series 90-30 PLC platform. This series of PLC particularly the IC693CMM311 is formerly manufactured by GE Fanuc however, recently acquired by Emerson Automation. This module provides CCM, Remote Terminal Unit (RTU), and SNP connectivity to any controller that hosts the module. Specifically, the IC693CMM311 is compatible for use with modular Series 90-30 CPUs. The IC693CMM311 comes with Two (2) communication interfaces such as Port 1 supporting RS232 standard and Port 2 supporting RS232 / RS422 and RS485 electrical standards. Each port is a 25-pin D-shell interface. This module is provided with a push to restart the communication button to re-initiate communication without restarting the entire module. The IC693CMM311 ports are configurable for a variety of protocol combinations such as CCM protocol on both ports; CCM protocol on port 1, RTU protocol on port 2; RTU protocol on port 1, CCM protocol on port 2; RTU protocol on both ports; SNP and SNP-X protocols on both ports; SNP and SNP-X protocols on port 1, CCM protocol on port 2; CCM protocol on port 1, SNP and SNP-X protocols on port 2; SNP and SNP-X protocols on port 1, RTU protocol on port 2; RTU protocol on port 1, SNP and SNP-X protocols on port 2. Supported transmission speeds for CCM, SNP, and RTU are 300, 600, 1200, 240, 4800, 9600, and 19200 Baud rate. Compatible pre-assembled cable is the Wye connection cable with catalog number IC693CBL305. This module comes with MODULE OK, PORT 1 and PORT 2 tatus LED indicators for determining the module’s state of operation.

The IC693CMM311 module is part of the Series 90-30 by GE Fanuc as a CCM or Communications Coprocessor Module. It is designed to be a high-performance device. The GE Fanuc Series 90-30 IC693CMM311 communications coprocessor module is compatible with all of the modular CPUs in the GE Series 90-30 product line, but it cannot be used with any of the embedded GE Series 90-30 CPUs such as the 311, 313, or 323 embedded GE CPUs. Any GE Fanuc Series 90-30 PLC with a modular CPU will benefit from the installation of the GE IC693CMM311 communications coprocessor module and all of its features and functions. The protocols that this communications coprocessor module can support are the SNP protocol, the Modbus or RTU slave communications protocol, and the GE Fanuc CCM communications protocol.

The GE Fanuc Series 90-30 IC693CMM311 communications coprocessor module has 2 built-in serial ports known as Port 1 and Port 2. The applications supported by Port 1 are RS-232 applications and the applications supported by Port 2 are RS-232 applications and RS-485 applications. Both of the ports are wired to the IC693CMM311 communications coprocessor module’s one and only connector, which can make wiring the module difficult, but the module comes with a GE Wye cable known as the IC693CBL305 Wye cable that technicians can use to separate the 2 ports and make wiring the module easier. The module can be configured with a default setup or with configuration software. Certain CPUs (models 331 and later) can support up to 4 of these communications coprocessor modules at a time in their CPU baseplates.

Introduction of Wisdomlong Technology CO.,LTD

Terms

1. We ships worldwide and accepts T/T and Paypal.
2. All items are subject to availability and passing our QA testing and inspection.
3. Turnaround Time:
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.

Shipping

1. We ship worldwid use UPS, FedEx, DHL, or Truck when needed.
2. Call to use a shipping service other than the ones listed.
3. International Customers are responsible for all Customs fees, VAT, and other fees applied by their respective countries.

FAQ