Ge Fanuc IC693ALG223C ， Series 90-30 Programmable Logic Controller
|
Ge Fanuc IC693ALG223C , Series 90-30 Programmable Logic ControllerProduct DescriptionIC693ALG223 is a PACSystems Series 90-30 RX3i Analog Current Input Module that offers 16 channels. The module’s 16 separate and single ended channels can be configured for any of the following three ranges: 4 to 20 mA, 0 to 20 mA, or 4 to 20 mA Enhanced. Both high and low alarms are obtainable on each range. In the enhanced range, the IC693ALG223 module can be set with a low alarm limit to detect input current with open wire fault detection in the 4 to 20 mA applications; high alarm alerts can also be set by the user. Additionally, this module reports status, including power supply standing to the CPU. IC693ALG223 can be used in any I/O slot that offers a serial connector in the RX3i or Series 90-30 system. Specific to the IC693ALG223 module, 120 mA from a 5 VCD bus on the controller backplane is consumed. This also needs a 65 mA plus current loop from a +24 VDC supply supplied by the user. An update rate of 6 ms is standard with isolation of 250 VAC continuous or 1500 VAC for one minute. When scanning active channels, the number of channels to be scanned will be completed in serial order. Analog values are scaled over the entire range of the converter with factory calibration adjusting the analog value per bit. RX3i racks support upgrades to the firmware associated with this module, but this does not include 90-30 racks. The IC693ALG223 is also equipped with LED status lights emitting ON, OFF, and FAIL to assist the user in operation and troubleshooting. Technical Specifications
About IC693ALG223The GE Fanuc Series 90-30 Programmable Logic Controller (PLC)
module with catalog number IC693ALG223 is a Sixteen (16) channels,
single ended, analog input module that is used to interface field
devices and instrument that provide analog signals as
representation to measurement of process variable. Specifically,
each channel of the IC693ALG223 is configurable of receiving 0-20
mA, 4-20 mA and 4-20 mA enhanced signals. Some of the devices that
are capable of providing these signals are Transmitters, Variable
Frequency Drive’s (VFD) speed feedback, data loggers, panel meters
and other devices. The IC693ALG223 is a single slot module that is installed to any slot of a Series 90-30 5-slot or 10-slot baseplate. Depending on the controller installed, the number of allowed instances of the IC693ALG223 varies. For Model 311, Model 313, and Model 323 system, up to Four (4) module instances is compatible. For Model 331 system, Eight (8) modules, Twelve (12) with Model 340 and 341 system and 51 in Model 351 and 352 systems. The IC693ALG223 has 12-bit resolution with update rate of 13 msec for all 16 channels, absolute accuracy of ± 0.25% of full scale @ 25 Deg. Celsius (77 Deg. Fahrenheit): ± 0.5% of full scale over specified operating temperature range and linearity of < 1 LSB from 4 to 20 mA for 4 to 20 mA range and < 1 LSB from 100 µA to 20 mA for 0 to 20 mA and 4 to 20 mA Enhanced ranges. This module is designed with 1500 volts isolation capability between field side and logic side. The IC693ALG223 16-Channel Analog Input Module comes with 200 Hertz of input filter response and 250 ohms of input impedance. The maximum number of analog current input modules that may be installed in the system is 4 with CPUs 311, 313, and 323, 8 with CPU 331 and 12 with CPUs 340 and 341. It has high levels of resolution and accuracy to deal with very sensitive analog signals. It can receive analog inputs from a variety of sensors such as level sensors, flow sensors, and temperature sensors. Each channels’ accuracy are 4 microamps of resolution in the 4 to 20 milliamps current range, 5 microamps of resolution in the 0 to 20 milliamps current range, and 5 microamps of resolution in the 4 to 20 enhanced milliamps current range. It uses an external power supply with a voltage range of 20 to 30 Volts DC and 10% supply voltage ripple. This module is designed to support a wide range of industrial signals
Technical Specifications for IC693ALG223
|
||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: 5V DC Digital I O Module PLC Isolated Relay Output Module PCM Solid State Microcomputer Module |
|
ABB INNPM12 NETWORK PROCESSOR MODULE DCS Module +5VDC 10W MAX |
|
KJ3002X1-BA1 INPUT MODULE 8 CHANNEL 4-20 MA HART BUS POWER 12 V |
|
DI801 3BSE020508R1 INPUT MODULE DIGITAL 24 VDC 16 CHANNEL PLC Module |
|
ABB NTCL01 INFI-Net Communication Link TU Module Termination Unit |
|
Honeywell 51400955-100 Processor Control Board Multi Input Output Network Interface Board |
|
Honeywell CC-PAIX01 Analog Input Module 51405038-275 100MA 24VDC |