CPU APM 5VDC 2 Axis Positioning Module ， GE FANUC IC693APU302

About IC693APU302

The IC693APU302 Axis Positioning Module is a motion mate axis positioning module made by GE Fanuc. It is a fully programmable and intelligent module that allows PLC users to integrate their controllers with the advanced logic functions of the PLC to create a single combined system. It can be used with GE Series 90-30 PLCs. This module can directly communicate with machines and control drives and it even transfers the data to the PLC’s tables. Some of the important features of this module include independent control stability, automatic data transferring facilities, maximized drive capabilities, and improved system performance. The IC693APU302 Axis Positioning Module also has the facilities to calculate and enhance the position error measurements to maintain the tracking accuracy. It can be used to perform the complex calculations that are required to control a servo system precisely.

The IC693APU302 Axis Positioning Module can be configured and programmed by using VersaPro Software or Logic developer-PLC software. The load requirement of the module is 800 milliamps of current at +5 Volts DC voltage. It comes with a 24-pin high-density connector. This module is suitable to operate in the standard mode and in the follower mode. When operating in the follower mode, it offers high-performance electronic gearing facilities for master/slave applications. Its motion configuration software offers a user interface for controlling and monitoring the system effectively. It also offers generic programming commands such as velocity, forward, move, and acceleration/deceleration commands. Its flash memory can store up to 10 programs and 40 subroutines. The APM front panel faceplate has two 24-pin high-density connectors for servo connections. The IC693APU302 Motion Mate Axis Positioning Module can be used in servo control applications for very precise motion control.