GE FANUC IC693MDL654 ， 5/12 Volt DC (TTL) Positive/Negative Logic Input Module

GE FANUC IC693MDL654 , 5/12 Volt DC (TTL) Positive/Negative Logic

Input Module

Product Description

IC693MDL654 is a 5/12 volt DC (TTL) Positive/Negative Logic Input module for the Series 90-30 Programmable Logic Controller. It delivers 32 discrete TTL voltage threshold input points which are grouped into four distinct groups, with each group having a total number of eight points labelled (A1 - A8, B1 - B8, C1 - C8, and D1 - D8). The inputs work in line to about 15V having positive or negative logic inputs. The +5V supply is produced on the module and later separated from the PLC backplane. One can decide to power the inputs from the internal supply rather than powering them with an external user issued supply. This can be made possible by Setting up jumpers on the right pins on the I/O connector. If this internal supply is used to power the inputs, more loading will be put on the PLC's +5V power supply in case an internal supply is utilized to power the inputs. Opto-couplers found on the module offers and supports backplane isolation of 1500 volts between field side and logic side and 250 volts between the four classes. In addition, no faults diagnostics are noted on the power supply. IC693MDL654 consumes an internal power of 195 mA from +5V bus on backplane.

The module consists of LED indicators listed as; A1 - A8, B1 - B8, C1 - C8, D1 - D8 located at the top of the module. The indicator provides ON/OFF status of every input point. The input current is 3.0 mA (typical ON current at 5 VDC) and 8.5 mA (typical ON current at 12 VDC). IC693MDL654 is of 32-point input design which uses 32 bits of discrete %I input data. It can be placed on an I/O port on a 5 or 10-slot baseplate in a Series 90-30 PLC system. Current from an input point leads to logic 1 within the input status table. Rated Voltage for IC693MDL654 is 5 to 12 volts DC, Positive or Negative Logic while the Input Voltage Ranges from 0 to 15 volts DC Links to the input circuits are created from the user’s input devices to two male (pin-type) 24-pin connectors (Fujitsu FCN-365P024-AU) placed on the front of the module. This link placed on the front viewpoint borders between class A and B.The another one on the left side borders class C and D. A cable that has a female connector on a single end with wires which is stripped enhances field wiring to field devices from modules connectors.

GE Fanuc Automation manufactures the IC693MDL654 module as an input module and a member of the Series 90-30 PLC product line. This input module is engineered and intended to meet the requirements for flexible industrial applications. It also comes with control architecture which makes it suitable for various applications such as material handling, high-speed packaging, and complex motion control applications. The GE Fanuc IC693MDL654 input module provides amazing flexibility through its modular design, and when this unit is properly configured, the operators can save on installation costs and space. It supports Ethernet communication through which it achieves monitoring in real-time. When installing this input module, the operators can start with an Ethernet-enabled CPU or the rack-mounted Ethernet module. This input module has support for the Modbus TCP/IP and SRTP application protocols, and it comes with scalable processing power which is common is many CPUs in Series 90-30 and which makes upgrading easy.

The GE Fanuc Automation IC693MDL654 input module also uses its scalable processing power which helps to enable the module to be able to operate at an optimal level of performance as required by modern industrial applications. This input module has a built-in motion control feature that helps to ensure that the input module achieves the level of performance that is required for the point-to-point applications. The input module also has field bus interface options that enables distributed control. The users have interface options such as the Profibus-DP, EtherNet EGD, or the Genius interface. Additionally, this module comes with a CIMPLICITY Machine Edition Logic Developer program which makes programming the unit easier. The GE Fanuc Series 90-30 input modules like this one all have redundancy options.

Technical Specifications

Technical Specifications for IC693MDL654