GE FANUC IC693MAR590 ， 120 volt AC Input/Relay Output module ， Series 90-30

GE FANUC IC693MAR590 , 120 volt AC Input/Relay Output module , Series 90-30

Product Description

The GE Fanuc IC693MAR590 is a 120 volt AC Input/Relay Output module. Equipped with eight input points, this module is designed to work with the Series 90-30 Programmable Logic Controller. The eight input points share a common power input terminal and it also has eight normally-open relay circuits. The input circuits are grouped together but the output points are split in two groups of four. Each output group has a common power output terminal. The module can operate pushbuttons, electronic proximity switches and limit switches due to its input characteristics. The user just needs to supply an external AC power source.
 

Each open relay circuit has an output switching capacity of 2 amps. These outputs may be used to control load devices as supplied by the user. For example, the module can control solenoids, indicators, and motor starters. This module has no fuses but it does have an LED block on top. This shows the status of the input points (the top row – A1 to A8) and the output points (the bottom row B1 to B8).

There is a door on the module. Users can use the door card for recording information about circuit identification or circuit wiring. This card has a red color code, which lets users know that this is a high-voltage module. Like similar models, this one can be installed in either a 5-slot or 10-slot baseplate to use it in a Series 90-30 PLC system. Any I/O slot is compatible with the IC693MAR590 Input/Relay Output module.

Technical Specifications

Technical Information