6DD1600-0BA1 Siemens Processor Module PLC Digital Input Module
|
|
6DD1600-0BA1 Siemens Processor Module PLC Digital Input Module Overview:
About 6DD1600-0BA1: Motor performance requirements. The compressor is the heart of the refrigeration equipment, the motor provides the original power for the compressor, converts the electric energy into mechanical energy, drives the compressor to realize the refrigeration cycle. The electric motor used in the refrigerator and air conditioner, together with the compressor, is sealed in a housing, and works under certain steam pressure and high temperature for a long time, so there are special requirements for the performance of the motor. Describtion: (1) the motor must have good chemical stability when immersed in
refrigerants and refrigerated oil for a long time. The insulation
material of motor is required to maintain reliable insulation
performance under high temperature and high pressure, and has good
resistance to refrigerants and refrigerated oil. (2) the motor is often started under full load or overload, which requires that the starting torque is large, can run normally during overload, and can adapt to a certain range of voltage fluctuations and frequent start-up requirements. (3) in order to improve the refrigeration capacity of the equipment, the motor is required to have high efficiency. (4) when the motor is sealed in the steel shell of the compressor, the working environment temperature is mostly above 70℃, and the temperature rise can reach about 100℃ when working.The winding coil and insulation material of motor are required to be resistant to high temperature and aging. (5) because the motor is vulnerable to the impact of electromagnetic force caused by starting current, the impact of refrigerants entering the shell, the thermal shock of rapid evaporation and the mechanical vibration when starting and stopping are required, the electromagnetic coil of the motor is required to have a certain mechanical strength and can withstand vibration. LYDP76 150±10 80±10 3.6 0.96-1.32(100℃) LYDP96 150±10 80±10 3.4 0.8-1.18 ( 100℃) LYDP79 150±10 80±10 4.7 1.15-1.56(100℃) LYDP97 150±10 80±10 3.8 1.0-1.35 ( 100℃) LYDP33 150±10 80±10 11 2.45-3.40(100℃ ) About US: Liability: WTL is not liable for any personal injury or property damage
resulting from the use of this equipment. It is WTL Service: |
||||||||||||
| Product Tags: Siemens PLC processor module digital input module 6DD1600 Siemens digital I O module |
|
1734-IB8S SER-B Type Allen Bradley 8-point I/O Module with Diagnostic and Short-Circuit Protection Functions |
|
IC693MDL741 GE Discrete Output Module 1500 Volts Between Field Side And Logic Side |
|
IC697MDL240 GE Discrete Input Module 16 Isolated Inputs 10 MA 60 Hz 120 Volts AC |
|
IC697MDL640 GE Discrete Input Module 125 V DC 16 Inputs 5 MA |
|
SCP461-51 S1 Yokogawa ARM Cortex-A57 Single-core 1.5 GHz Programmable Processor Module |
|
IC693CPU364 GE Single Slot CPU Module With Embedded Ethernet Interface 240K Bytes |