| IC200CHS003 | IC200CHS101 | IC200CHS102 | IC200CHS111 |
| Product Name | VersaMax I/O Carrier,
Connector Style .
A connecting cable
(IC200CBL1xxx) and
interposing base
(IC200CHS011, CHS012,
CHS014, CHS015,
IC200CHS1xx or
IC200CHS2xx) are required .
This carrier can be used with
all VersaMax I/O modules
EXCEPT the following, due
to their high isolation
requirements: IC200MDL144
Input 240 VAC 4 Point Isolated
Module; IC200MDL244 Input
240 VAC 8 Point Isolated
Module; IC200MDD850
Mixed 240 VAC Isolated
4 Point / Output Relay 2 .0A
Isolated 8 Point Module | Input or Output Interposing
Disconnect Style 16 Points .
The base has an individual
knife-switch disconnect
for each signal and common
terminal and its corresponding
pin on the VersaMax cable
connector . Requires
IC200CHS003 and a
connecting cable
IC200CBL1xxx | Expansion Input or Output
Interposing Disconnect Style
16 Points . The base has an
individual knife-switch
disconnect for each signal
and common terminal and
its corresponding pin on the
VersaMax cable connector .
Requires a IC200CHS101 main
base, can not be directly
connected to IC200CHS003 . | I/O Interposing Relay Base
(replaceable relays), fused
(8 amps, replaceable), 16
points . The relays on these
interposing terminals are
intended to
be controlled with standard
24 VDC 0 .5A VersaMax output
modules (IC200MDL740 and
IC200MDL750 using
IC200CHS003 base and
connected by IC200CBL1xxx) . |
| Lifecycle Status | Active | Active | Active | Active |
| Field Termination Type | ntegrated | Non-Integrated | Non-Integrated | Non-Integrated |
| Wiring Termination Style | Connector | Box | Box | Box |
| Removable Terminals Connectors | N/A | No | No | No |
| Input Voltage | N/A | All discrete modules supported
except MDL144, 244, 331, 730
and MDD840, 843, 850 . | All discrete modules supported
except MDL144, 244, 331, 730
and MDD840, 843, 850 . | 24 VDC from MDL740
and MDL750 |
| Output Voltage | N/A | All discrete modules supported
except MDL144, 244, 331, 730
and MDD840, 843, 850 . | All discrete modules supported
except MDL144, 244, 331, 730
and MDD840, 843, 850 . | 0-125 VDC, 5/24/125 VDC
nominal; 0-265 VAC (47-63 Hz),
120/240 VAC nominal |
| Load Current per Point | N/A | N/A | N/A | 8 .0 A for 5-265 VAC,
2 .0 A for 5-30 VDC,
0 .2 A for 31-125 VDC
(Replaceable Fuse) |
| Protection | N/A | N/A | N/A | Replaceable Fuse |
| Points per Common | N/A | N/A | N/A | Isolated Per Point |
| Dimensions (W x H x D) | 66 .8 mm (2 .63 in) x 133 .4 mm
(5 .25 in) x 70 mm (2 .75 in),
not including the
height of the DIN-rail | 115 mm (4 .5 in) x 126 mm
(4 .95 in) x 65 mm (2 .6 in),
not including the
height of the DIN-rail | 115 mm (4 .5 in) x 126 mm
(4 .95 in) x 65 mm (2 .6 in),
not including the
height of the DIN-rail | 253 .7 mm (9 .9 in) x 126 mm
(4 .95 in) x 73 mm (2 .8 in),
not including the
height of the DIN-rail |
| Cables | Requires a
IC200CBL1xxx cable | Requires a
IC200CBL1xxx cable | N/A | Requires a
IC200CBL1xxx cable |
