Mitsubishi Industrial AC Servo Drives MR-J2S-20A Servo Amplifier NEW
|
Detailed Product Description
|
Mitsubishi Industrial AC Servo Drives MR-J2S-20A Servo Amplifier NEW
1. WHAT ARE EC DIRECTIVES? The EC directives were issued to standardize the regulations of the
EU countries and ensure smooth distribution of safety-guaranteed products. In the EU countries,
the machinery directive (effective in January, 1995), EMC directive (effective in January, 1996) and low
voltage directive (effective in January, 1997) of the EC directives require that products to be sold should
meet their fundamental safety requirements and carry the CE marks
(CE marking). CE marking applies to machines and equipment into which servo amplifiers have been installed. (1) EMC directive The EMC directive applies not to the servo units alone but to
servo-incorporated machines and equipment. This requires the EMC
filters to be used with the servo-incorporated machines and
equipment to comply with the EMC directive. For sp ecific EMC
directive conforming methods, refer to the EMC Installation Guidelines (IB(NA)67310). (2) Low voltage directive The low voltage directive applies also to servo units alone. Hence,
they are designed to comply with the low voltage directive. This servo is certified by TUV,
third-party assessment organization, to comply with the low voltage
directive. (3) Machine directive Not being machines, the servo amplifiers need not comply with this
directive. 2. PRECAUTIONS FOR COMPLIANCE (1) Servo amplifiers and servo motors used Use the servo amplifiers and servo motors which comply with the
standard model. Servo amplifier series : MR-J2S-10CL to MR-J2S-700CL MR-J2S-10CL1 to MR-J2S40CL1 Servo motor series : HC-KFS HC-MFS HC-SFS HC-RFS HC-UFS HA-LFS (2) Configuration
(3) Environment Operate the servo amplifier at or above the contamination level 2
set forth in IEC60664-1. For this purpose, install the servo
amplifier in a control box which is protected against water, oil,
carbon, dust, dirt, etc.
(4) Power supply (a) Operate the servo amplifier to meet the requirements of the
overvoltage category II set forth in IEC60664-1. For this purpose,
a reinforced insulating transformer conforming to the IEC or EN
Standard should be used in the power input section. (b) When supplying interface power from external, use a 24VDC power
supply which has been insulation-reinforced in I/O. (5) Grounding (a) To prevent an electric shock, always connect the protective
earth (PE) terminals (marked) of the servo amplifier to the
protective earth (PE) of the control box. (b) Do not connect two ground cables to the same protective earth
(PE) terminal (marked). Always connect the cables to the terminals
one-to-one.
Capacitor discharge time
The capacitor discharge time is as listed below. To ensure safety,
do not touch the charging section for 15 minutes after power-off.
V.Packaging & Delivery
Packaging Details
VI.Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson / Delta V】Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
|
||||||||||
| Product Tags: ac servo pack ac servo drive |
Related Products
|
MR-S12-80A-Z33 MITSUBISHI Servo Drive AMP AC 2 Axis Option Card RF 322 |
|
ACH550-01-031A-4 ABB AC Hvac Drive 550 Series IEC Installation Setup 380-480 VAC |
|
3G3JX-A4004 OMRON JX Frequency Inverters AC Drive 1/2HP 480V 0.4KW 3PH |
|
EMERSON SM-ETHERNET ETHERNET MODULE RJ45 CONNECTIVITY Drive Interface |
|
ABB Inverter Standard AC Drive ACS-550-01-059A-4 380-400V 30kw 59A Low Voltage Drives |
|
A20B-0007-0040/04A PC BOARD DI/DO BOARD I/O RELAY CARD 6T/M CONTROL CNC |
Email to this supplier