ABB S900 I/O Analog Module AI930S Analog Input, HART (AI4H-Ex)
3KDE175511L9300
1. Digital I/O modules
DX910S,B,N*
2. Digital output modules
DO910S,B,N*
DO930N
3. Pulse input modules
DP910S,B,N*
4. Analog input modules
AI910S,B,N*
AI930S,B,N*
AI931S,B,N*
AI950S,B,N*
5. Analog output modules
AO910S,B,N*
AO920S,B,N*
AO930S,B,N*
Related Analog Input Modules
| Model | Description | Article No. | | AI910S | AI910S Analog input (AI4-Ex) transmitter power supply, 4...20 mA | 3KDE175511L9100 | | AI930S | AI930S Analog Input, HART (AI4H-Ex) transmitter power supply, 4...20 mA | 3KDE175511L9300 | | AI931S | AI931S Analog Input, HART (AI4H-Ex) passive input, 0/4...20 mA | 3KDE175511L9310 | | AI950S | AI950S Temperature (TI4-Ex) Pt100, Pt1000, Ni100 in 2-/3-/4-technology thermocouples type B, E, J, K, L, N, R, S, T isolated inputs channel by channel | 3KDE175521L9500 |
Analog Output Modules
| Model | Description | Article No. | | AO910S | AO910S Analog output (AO4-Ex) output 0/4...20 mA | 3KDE175531L9100 | | AO920S | AO920S Analog output, isolated (AO4I-Ex) output 0/4...20 mA isolated outputs channel by channel | 3KDE175531L9200 | | AO930S | AO930S Analog output HART (AO4H-Ex) output 0/4...20 mA | 3KDE175531L9300 |
Others S900 Remote I/O System Modules
| Model | Description | Article No. | | TU921S | TU921S Redundant Termination Unit (TU16R-Ex) for 16 I/O-modules redundant communication and power (Delivery includes CD910) | 3KDE175111L9210 | | SA920S | SA920S Power Supply for 24 V DC Do not mix SA910S with SA920S for redundancy (observe Release Notes | 3BDH000602R1 | | CI920AS | CI920AS Communication Interface V 2.1 (CIPBA-Ex) Use only CI920AS with the same firmware for redundancy for PROFIBUS DP-V1 (observe Release Notes). | 3BDH000690R1 | | DX910S | DX910S Digital Input or Output (DIO8-Ex) input for dry contact or NAMUR initiator output for low power Intrinsic Safe valves | 3KDE175311L9100 | | DO910S | DO910S Digital Output (DO4-Ex) output for Intrinsic Safe valves | 3KDE175321L9100 | | DP910S | DP910S Frequency Input (FI2-Ex) input for dry contact or NAMUR initiator | 3KDE175361L9100 |
Description of S900
S900 is a remote I/O system for mounting directly in the field and
hazardous areas.
S900 provides all input and output modules needed for intrinsically
safe field signal connection. The field signals are amplified in
every S900 functional module, electrically isolated, and then
output via an internal serial bus. A communication interface
converts the digitized signals to adapt them to the standardized
PROFIBUS DPV1 fieldbus protocol. Supervisory process control
systems, DCS or SCADA systems use an intrinsically safe fieldbus to
communicate with the communication interface.
A single fieldbus network suffices for configuring the individual
fieldbus nodes, for cyclic data exchange, for all acyclic services,
and for communication with HART®-compatible field instruments. All
functional modules can be replaced easily and quickly in the
installation or maintenance phase. The functional modules and the –
optionally redundant – communication interfaces of systems placed
in Zone 1 can be removed and plugged in while operation is running,
without affecting the communication of the remaining modules. Only
the primary power for the plug-in type power supply modules
requires increased safety EEx-e.
Integrated encapsulated switch-off mechanisms allow for
hotswapping, i.e. the power supply units can be replaced without
interrupting the primary power. Due to its little space
requirements and robust design and its environmentally ruggedized
case, the I/O system S900 is the best, cost-saving
Application
Ready-made, EExi/ATEX-certified high-grade steel housings and the
CB220 Compact Box for assembly in the field provide a wide range of
installation options.
Field housings – for wall-mounting in the case of installation in
Zone1 with a system approval fully certified in accordance with
ATEX. The stainless steel field housing is ready-wired and prepared
for wall-mounting. In addition, screen rails or terminals can be
mounted. Together with the field housing, this brings the following
advantages: - Complete design, heat compensation, and documentation by ABB
- Elimination of additional marshalling units
- Thanks to the S900 modules, no external barriers are needed for the
field circuits
- Simplified acceptance of the plant with regard to hazardous areas
CB220 compact box – S900 remote I/O in compact form with up to 4
I/O modules for decentralized use in a compact housing. This
variant is suitable, for example, for use in applications such as
temperature multiplexers and solenoid controls. The CB220 compact
box additionally offers the following advantages: - Compact design
- Easy field assembly
- Decentralized assembly makes it possible to cut down on wiring
Picture
Some ABB items sold by WTL:
Liability: WTL is not liable for any personal injury or property damage
resulting from the use of this equipment. It is
buyer's responsibility as to the safe handling & operation of
this equipment and to verify equipment is
compliance to their machinery.
Our Brands:
| 【Honeywell】 | Module DCS/PLC/Transmitter | | 【Emerson/Delta V】 | Module/ CT Motor & Drives | | 【ABB】 | I/O Module | | 【AB】 | Module&Touch Screen | | 【Rosemount】 | Transmitter | | 【Yokogawa】 | Transmitter | | 【Yaskawa】 | Servo Drive&Servo Motor | | 【GE/Fanuc】 | IC69 Series PLC | | 【Mitsubishi】 | Servo Drive&Servo Motor |
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
|
