0.1Kw Output Industrial Servo Drives SGDM-01AD 50 / 60hz Input Frequency

 

 

 

 

 

 

 

 

 

SERVOPACK Type
Applicable   Servomotor
SGMAHSGMPHInput  Power Supply
Main Circuit
Control CircuitControl Method
Max.Applicable Motor Capacity
Continuous Output Current 200V  100V
Feedback
Configuration Approx. Mass
A3ADA
02A0.22.16.5––04ADA

04A04A0.42.88.5––
A3BDAA3B–0.03––0.662.0
A5BDAA5B–0.05––0.952.9
01BDA01B01B0.1––2.47.2
02BDA02B02B0.2––3.09.0
Single-phase 200 to 230VAC 10 to 15% (50/60Hz)
Single-phase 200 to 230VAC 10 to 15% (50/60Hz)
Single-phase 100 to 115VAC 10 to 15% (50/60Hz)
Single-phase 100 to 115VAC 10 to 15% (50/60Hz)
Single-phase full-wave rectification / IGBT / PWM / sine-wave current drive method
Serial encoder (incremental/absolute value)
Base mounted (Rack mount is also available)
0.8 1.1 0.8 1.1 :T

 

 

Molded-case Circuit Breaker (MCCB)

Protects the power line by shutting the circuit OFF when overcurrent is detected.

 

   

 

Noise Filter

Used to eliminate external noise from the power line

 

 

 

 

Magnetic Contactor Type HI-15E5 (30A)

Turns the servo ON and OFF. Install a surge suppressor on the magnetic contactor

 

 

 

 

Magnetic Contactor Type HI-15E5 (30A)

Turns the servo ON and OFF. Install a surge suppressor on the magnetic contactor

 

 

 

 

Host Controller

Connect the SGDH SERVOPACK to a YASKAWA host controller or one made by other vendors. MP920 (Analog input, pulse train input available.)

 

 

 

SGDM SERVOPACK T

 

 

∑-2 Servomotor (30 to 400W)

ype SGDM-A3=DA to -04=DA

 

 

 

 

 

 

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of Yaskawa. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because Yaskawa is con-stantly striving to improve its high-quality products, the information contained in this manual is subject to change without notice. Every precaution has been taken in the preparation of thismanual. Nevertheless, Yaskawa assumes no responsibility for errors or omissions. Neither isany liability assumed for damages resulting from the use of the information contained in thispublication.