250ms Format Redundancy Diode Module Quantum I / O 140CPU43412A
|
|
Power Supply Module SCHNEIDER ELECTRIC MODICON 140CPU43412A CPU
MODULE
Specifications
Main
Complementary
Environment
Ordering and shipping details
Offer Sustainability
Contractual warranty
OTHER SUPERIOR PRODUCTS
Contact person: Anna E-mail: wisdomlongkeji@163.com Cellphone: +0086-13534205279 Similar Products 140CRA93200 140CRP81100 140CRP93100 140CRP93200 140DAI34000 140DAI35300 140DAI44000 140DAI45300 140DAI54000 140DAI54300 140DAI55300 140DAI74000 140DAI75300 140DAM59000 140DAO84000 140DAO84010 140DAO84200 140DAO84210 140DAO84220 140DAO85300 140DDI15310 140DDI35300 140DDI35310 140DDI36400 140DDI67300 140DDI75300 140DDI84100 140DDI84300 140DDI85300 140DDM39000 140DDM69000 140DDO15310 140DDO35300 140DDO35310 140DDO36400 140DDO84300C 140DDO84300 140DDO88500 140DRA84000 140DRC83000 140DVO85300 140EHC10500 140EHC20200 140ESI06210 140HLI34000 140IFC020 140MMB10200 140MSB10100 140MSC10100 140NOA61110 140NOE21100 140NOE21110 140NOE25100 140NOE25110 140NOE31100 140NOE71100 140NOE77100 140NOE77101 140NOE77110 140NOE77111 140NOL91120 140NOM21100 140NOM21100 140NOM21200 140NOP91100 140Q8PENETSW01 140QSPXM 140SHS94500 140XBE10000 140XBP00300 140XBP00400 140XBP00600 140XBP01000 140XBP01600 140XCA71703 140XCP40100 140XCP51000 140XSM00200 140XSM01000 140XTS00100 140XTS00200 140XTS00203 140XTS00206 140XTS00212 140XTS01206 140XTS01212 140XTX00200 140CRA93100 140CRA93101 The Modicon 140-CPU-434-12A uses Concept, ProWORX 32, and Unity software with a 80486 processor and a With mathematical coprocessor. It has a clock frequency of 66 Mhz and an internal RAM capability of 896 kB. It can use a 6 NOM, NOE, CR, or N The Schneider Electric 140CPU43412A is a Quantum CPU module located on the Quantum local I/O backplane. The CPU uses a digitally operating electronic system using programmable memory for storing the user’s instructions. These settings are then used for functions like logic, process sequencing, timing, coupling, and arithmetic.
This allows the user to control machines and processes through digital and analog outputs. The Quantum CPU also serves as the bus master for controlling the local, remote, and distributed I/O of the Modicon Quantum system. The 140-CPU-434-12A uses a single slide switch to select the comm parameter settings for the Modbus (RS-323) ports. The Quantum CPU hardware defaults to a bridge mode when the front panel switch is set to RTU mode or ASCII mode. When networking controllers together, a panel device connected to the CPU Modbus port can also communicate with the controlly that it is connected to, as well as log into any nodes that are on the Modbus Plus network.
If the switch position is set to stop, the application in Flash memory is not being transferred to the internal RAM, and a warm restart of the application is then triggered. From Start or Mem Prt, it will stop the controller if it is running and voids any programmer changes. When the switch position is set to Mem Prt, the same behavior occurs. However, from Stop or Start, it prevents program changes and the controller run status remains unchanged. If the switch is in the Start position, the application in Flash memory is automatically transferred to internal RAM when the CPU is powered up. A cold restart is triggered as well. From Stop, it enables programmer changes and starts the Schneider Automation 140CPU43412A. From Mem Prt, it accepts the programmer’s changes and starts the controller if it is stopped.
The Quantum 140CPU43412A CPU is a single-slot
programmablecontroller with built-in executive memory, application
memory andcommunication ports. All memory components are on board
so noadditional chips or cartridges are necessary.Quantum CPUs use
flash memory technology to support the CPU’sexecutive memory and
instruction set. Flash is a state-of-the-art,nonvolatile memory technology that
enables downloadable fieldupgrades as new features become
available.The application program can be stored in either
battery-backed RAMand/or Flash RAM. The battery is located on the
front of the CPU andcan be serviced while the CPU is running. To
protect the applicationprogram from inadvertent changes during
operation, the140CPU43412A features a memory-protect switch. An LED goes onwhen this switch is activated.The 140CPU43412A CPU
has two Modbus ports and one ModbusPlus port. Simple rotary
switches on the back of the CPU are used toset the network address
of the Modbus Plus port. Each device on aModbus Plus network must
have a unique address in the range 1 … 64. The 140CPU43412A is a 80486 PLC Processor with 896kB internal RAM. 2 Modbus RS232 and 1 Modbus Plus port. 1.2Ah lithium battery. Key switch function. Supports Modsoft, version 2.6 or higher Concept, version 2.1 or higher ProWORX NxT, version 2.0 or higher ProWORX Plus, version 1.05 or higher ProWORX 32, version 1.0 or higher Unity, version 1.0 or higher. 66MHz Clock frequency Green product -0 to 60°C Ambient temperature FAQS 1,What is the replacement for the 140CPU43412A?
2,Which Quantum PLCs allow the use of an Aux task in Unity?
3,Which Quantum controllers support Concept IEC Hot Standby?
4,Which Quantum PLCs are supported in Unity Software?
5,Which Quantum PLCs have the Factory Mutual (FM) Class 1 Div. 2
rating? |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: analog interface module plc power supply module |
|
3BSE000863R0001 SR511 POWER REGULATOR MODULE 310 W MAX 35 AMP 18-30 VDC INPUT 5 VDC OUTPUT |
|
Honeywell TK-FXX102 Redundant Power Supply Module 10SLOT Coated 5.1VDC - 24VDC |
|
Honeywell TC-ODJ161 Output Module Isolated Discrete 16 Point 24 VDC |
|
EMERSON FISHER ROSEMOUNT 01984-1137-0001 POWER SUPPLY I/O PCB BOARD MODULE |
|
AO801 Analog Input Output Module 3BSE020514R1 ABB 20mA 12 Bit RLmax 850 Ohm |
|
ABB AC 800F TK808F Supply Cable 3BDM000211R1 115/230 VAC Euro Plug 2 M |