IC200MDL650 Redundant Power Supply Module Micro Controller Control Module
|
|
Redundant Power Supply Module GE Fanuc IC200MDL650 Input Micro Controller Control Module
Module Characteristics Points IC200MDL640, BXIOIS1624: 16 (2 groups of 8)
IC200MDL650,
BXIOID3224: See chart
Input Characteristics Input voltage 0 to +30VDC,+24VDC nominal Configurable filter time 0 ms, 1.0ms (default), or 7.0ms
Contact person: Anna E-mail: wisdomlongkeji@163.com Cellphone: +0086-13534205279 Discrete input modules IC200MDL640 and BXIOID1624 provide two
groups of 8 discrete inputs. Discrete input module IC200MDL650 (shown below) and BXIOIX3224 provide four groups of 8 discrete inputs. Inputs in each group can be either positive logic inputs that receive current from input devices and return the current on the common, or negative-logic inputs that receive current from the common and return current to the input device. Input devices are connected between the input terminals and common terminals. LED Indicators Individual green LEDs indicate the on/off state of each input
point. The green OK LED is on when backplane power is present to
the module. Preinstallation Check Carefully inspect all shipping containers for damage. If any
equipment is damaged, notify the delivery service immediately. Save
the damaged shipping container for inspection by the delivery
service. After unpacking the equipment, record all serial numbers. Save the shipping containers and packing material in case it is necessary to transport or ship any part of the system. Installation in Hazardous Locations • EQUIPMENT LABELED WITH REFERENCE TO CLASS I, GROUPS A, B, C &
D, DIV. 2 HAZARDOUS LOCATIONS IS SUITABLE FOR USE IN CLASS I,
DIVISION 2, GROUPS A, B, C, D OR NON-HAZARDOUS LOCATIONS ONLY • WARNING - EXPLOSION HAZARD - SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR CLASS I, DIVISION 2; • WARNING - EXPLOSION HAZARD - WHEN IN HAZARDOUS LOCATIONS, TURN OFF POWER BEFORE REPLACING OR WIRING MODULES; AND • WARNING - EXPLOSION HAZARD - DO NOT DISCONNECT EQUIPMENT UNLESS POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN TO BE NONHAZARDOUS. Thermal Derating No derating is required for the 16-point modules, or for the
32-point modules at 24VDC in any orientation. For 32-point modules at 30VDC, the number of points that can be on at the same time depends on the ambient temperature, the external voltage, and the orientation of the module and DIN rail Product Revision History IC200MDL640G / BXIOID1624G IC200MDL650G / BXIOID3224G October 2008 Updated Power Supply OK signal circuitry. IC200MDL640F / BXIOID1624F IC200MDL650F / BXIOID3224F April 2005 Improvement to latching mechanism IC200MDL640E IC200MDL650E April 2004 Changed to V0 plastic for module housing. BXIOID1624E BXIOID3224E January 2004 Changed to V0 plastic for module housing. ATEX approval for Group 2 Category 3 applications. IC200MDL640D IC200MDL650D January 2004 ATEX approval for Group 2 Category 3 applications. IC200MDL640C / BXIOID1624C IC200MDL650C / BXIOID3224C November 1999 Added operation with negative logic inputs. IC200MDL640A / BXIOID1624A IC200MDL650A / BXIOID3224A September 1998 Origin The 32 inputs form groups of 8. Each group has a common connection.
Each group may be wired for positive or negative logic inputs.
Note: Negative-logic functionality requires module version -C or
higher. For the 16-point modules, if additional bussed terminals are needed, the B terminals can be made available using a shorting bar. The shorting bar has a maximum current-carrying capacity of 2 Amps per point. See the VersaMax I/O Modules Manual, GFK-1504 for information about using a shorting bar. Wiring Connections for Carriers with Two Rows of Terminals Row B
connections shown below are for 32-point modules only Wiring Connections for Carriers with Three Rows of Terminals Side B
connections shown below are for 32-point modules only |
||||||||
| Product Tags: plc power supply module diode redundancy module |
|
3BSE000863R0001 SR511 POWER REGULATOR MODULE 310 W MAX 35 AMP 18-30 VDC INPUT 5 VDC OUTPUT |
|
Honeywell TK-FXX102 Redundant Power Supply Module 10SLOT Coated 5.1VDC - 24VDC |
|
Honeywell TC-ODJ161 Output Module Isolated Discrete 16 Point 24 VDC |
|
EMERSON FISHER ROSEMOUNT 01984-1137-0001 POWER SUPPLY I/O PCB BOARD MODULE |
|
AO801 Analog Input Output Module 3BSE020514R1 ABB 20mA 12 Bit RLmax 850 Ohm |
|
ABB AC 800F TK808F Supply Cable 3BDM000211R1 115/230 VAC Euro Plug 2 M |