Electric Fork Reach narrow aisle Truck Capacity 1500kgs
3300lbs single scissor forklift max.lift height 6.5mElectric fork reach narrow aisle truck CQDH15C advanteages: SAFETY AND STABILITY - Advanced AC control system eliminating the motor brushes and
directional contactor, which makes the minimal maintenance
requirements.
- Stepless speed control Intelligentized regenerative brake system:
increase overall truck performance by decreasing battery charge
intervals.
- Equipped with adjustable hand-rest, adapted to different operator.
- Multi-function display: battery status, hour meter, fault indicator
etc.
- Two sides-way battery with roll-out system is very convenient to
replace batteries.
- Damping cushion for low-noise operation.
- Built-in pressure relief valve protects the trucks from overloads.
- Emergency power disconnect.
STRUCTURAL - Low Center of Gravity ensures the stable operation.
- Vertical driving wheel has a small turning radius and easy to
maintain. The motor structure is water-proof and dust-proof.
- The Scissor Reach Forks is operated by electric controller, which
makes operation stable and no impact.
SERVICEABILITY - Low battery protection setting prolongs the battery use time.
- CANbus technology reduces wiring complexity and increase
reliability.
- All pivot points have grease fitting and serviceable bushing,
reducing component wear and extending component life.
- The back cover is easy to open for maintenance and adjustment of
parts of valve, oil tube and electronic parts.
Electric fork reach narrow aisle truck CQDH15C size information: Model | | CQDH15C (single scissor) | Drive type | | battery | battery | battery | battery | Load capacity/Rated load | Q(kg) | 1500 | Load centre distance | c(mm) | 500 | Load distance, centre of drive axle fork | x(mm) | 334 | 309 | 246 | 246 | Tyre size, front | mm | 280×82+160×60 | 280×82+160×60 | 280×82+160x60x2 | 280×82+160x60x2 | Tyre size, rear | mm | 125×82(4) | 125×82(4) | 125x82x4 | 125x82x4 | Wheels, number front rear(x=driven wheels) | | 1+2 | 1+2 | 1x+2/4 | 1x+2/4 | Tilt of mast/fork carriage forward/backward) | Grad | 43866 | 43866 | 43866 | 43866 | Height, mast lowered | h1(mm) | 2125 2375 2625 | 2185 2345 2505 2675 | 2125 2375 2625 | 2185 2345 2505 2675 2840 | Free lift | h2(mm) | ~ ~ ~ | 1575 1700 1825 2000 | ~ ~ ~ | 1776 1776 2010 2080 2240 | Max. lift height | h3(mm) | 3000 3500 4000 | 4500 5000 5500 6000 | 3000 3500 4000 | 4500 5000 5500 6000 6500 | Height, mast extended | h4(mm) | 3881 4381 4881 | 5381 5881 6381 6881 | 3900 4400 4900 | 5400 5900 6400 6900 7400 | Height of overhead guard | h6(mm) | 2246 | 2246 | 2246 | 2246 | Overall width | b1/b2(mm) | 1310/1040 | 1310-1400/1040 | 1295/1040 | 1295/1040 | Overall length | l1(mm) | 2409 | 2435 | 2615 | 2616 | Length to face of forks | l2(mm) | 1339 | 1365 | 1518 | 1518 | Fork Dimension | s/e/l(mm) | 35/100/1070 | 35/100/1070 | 35/100/1070 | 35/100/1070 | Reach distance | l4(mm) | 500 | 500 | 600 | 600 | Fork height, lowered | h8(mm) | 130 | 130 | 130 | 130 | Distance of “X” (see below diagram) | mm | 450 | 450 | 450 | 450 | Overall length (excluding the fork) | mm | 1868 | 1868 | 1868 | 1868 | Ground clearance, centre of wheelbase | m2(mm) | 65 | 65 | 49 | 49 | Aisle width for pallets 1000×1200 crossways | Ast(mm) | 2814 | 2839 | 2956 | 2956 | Aisle width for pallets 800×1200 lengthways | Ast(mm) | 2871 | 2902 | 3027 | 3027 | Turning radius | Wa(mm) | 1718 | 1718 | 1791 | 1791 | Travel speed, laden/unladen | Km/h | 6.5/7 | 6.5/7 | 6.5/7 | 6.5/7 | Lift speed, laden/unladen | m/s | 0.135/0.161 | 0.135/0.161 | 0.27/0.43 | 0.27/0.43 | Lowering speed, laden/unladen | m/s | 0.15/0.122 | 0.15/0.122 | 0.45/0.364 | 0.45/0.364 | Battery voltage, nominal capacity K5 | V/Ah | 24/420(560) | 24/420(560) | 36/700 | 36/700 | Battery weight | kg | 340/425 | 340/425 | 810 | 810 | Battery dimension l/w/h | mm | 780x335X500 | 780x335X500 | 978x395x765 | 978x395x765 | Service weight (with battery) | kg | 2450 2500 2560 | 2700 2800 2900 3000 | 3130 3180 3230 | 3470 3570 3670 3370 3770 |
FAQQ1: Can Herrman provide customized products? OEM products or ODM
products?
A1: Yes, Herrman can provide customized products according to your
requirement. Both OEM and ODM are acceptable. We do a lot
ofnon-standard products, welcome your special custom-made.
Q2: What's the specification of the chargers?
A2: Herrman have all kinds of the chargers and welcome the
customers to custom-made.
Q3: How about the delivery time?
A3: Usually Herrman producing time is 15-20 working days after we
receive the advanced payment. For some standard products, we have
most in stock and could delivery immediately.
Q4: Can we print the LOGO on products?
A4: Yes, the OEM is available with the permission of our customers.
Q5: What is your payment term?
A5: T/T,L/C or O/A if you want any other way, please contact us.
Q6: What can I get from cooperating with Herrman?
A6: 1. Unique products, with customized service.
2. Timely production and delivery, time is money.
3. Market protection service, long term business strategy. bruce@herrman.com
|