Green power, Green World. SOLAR PANEL / PV MODULE: 1. Use A-grade solar cell with high efficiency; 2. High transmittance, low iron tempered glass with enhanced
stiffness and impact resistance; 3. Anodized aluminum alloy frame with high mechanical strength for
easy installation; 4. Anti-aging EVA and high flame resistant Back Sheet (TPT), to
provide long-life and enhanced cell performance; 5. Outstanding electrical performance under high temperature and
low irradiance conditions; 6. 100% apply EL(electroluminescence) technology; 7. 5 years limited warranty, 10 years limited warranty for 90%
power output, 25 years limited warranty for 80% power output; 8. With CE, ISO9001: 2008 certificate;
What's the advantages of solar energy? - Solar energy is a clean and renewable resource.
- No pollution, no noise and no effect on ecological balance during
use.
- High efficiency of energy conversion and long time sustainable use.
- Low maintenance and repair costs.
- Wide range of applications.(home and outdoor, industrial and
commercial)
- Low use of environmental requirements.(-40ºC~+85ºC, just need sunshine)
- Easy to install and use.
Repair and maintenance- Regularly check the panel for damage, ensure timely detection,
timely replacement.
- Regularly check solar system cable and ground connection is good.
- Periodically check solar mounting structure have loose or broken
phenomenon.
- Check and clean-up the covering around the panel and surface with
clean water and gauze, do not rinse with hard or corrosive solvents
- In case of gale, heavy rain, rainstorm, hail, heavy snow and so on,
measures should be taken to protect the solar cell module from
damage.
- After the gale, heavy rain, heavy snow or rainy season, immediately
check whether solar panel displace, controller and battery box
exist water, and thunderstorm after check whether the device is
working properly, its charge and discharge controller is damaged,
etc. .
- Batteries used in matching with solar modules should strictly
accordance with the battery maintenance instructions and methods.
Detailed Product DescriptionType | P325 | P320 | P315 | P310 | P305 | P300 | P295 | P290 | P285 | P280 | Wattage(W) | 325 | 320 | 315 | 310 | 305 | 300 | 295 | 290 | 285 | 280 | Open Circuit Voltage(V) | 45.30 | 45.20 | 45.10 | 45 | 44.9 | 44.8 | 44.6 | 44.5 | 44.4 | 44.2 | Short Circuit Current(I) | 8.87 | 8.79 | 8.71 | 8.97 | 8.87 | 8.8 | 8.73 | 8.67 | 8.6 | 8.49 | Maximum Power Voltage(V) | 37.00 | 36.80 | 36.60 | 36.4 | 36.2 | 36.1 | 35.9 | 35.8 | 35.7 | 35.5 | Maximum Power Current(I) | 8.78 | 8.70 | 8.61 | 8.52 | 8.43 | 8.32 | 8.22 | 8.11 | 7.99 | 7.89 | Cell Efficiency | 18.90% | 18.60% | 18.31% | 18.02% | 17.73% | 17.44% | 17.15% | 16.86% | 16.57% | 16.28% | Module Efficiency | 16.63% | 16.48% | 16.23% | 15.97% | 15.71% | 15.45% | 15.20% | 14.94% | 14.68% | 14.42% | Maximum System Voltage | DC1000V | Temperature Coefficient of Voc | -0.27%/°C | Temperature Coefficient of Isc | +0.045%/°C | Temperaturecoefficient of Pmax | -0.408%/°C | Maximum Series Fuse Rating | 15A | Number of Cells | 72(6*12) Mono Crystalline silicon, 156*156mm(6 inches) | Junction Box | Ip67 rated/with 6 bypass diodes | Cable | 4.0mm2 (0.006inches2,symmetrical
lengths(-)1100mm(43.30inches)and(+)1100mm(43.30inches)) | Tempered Glass | 3.2mm(0.13inches)tempered glass | Cell Encapsulation | EVA(Ethylene-vinyl-Acetate) | Back Sheet | composite film | Frame | Anodized aluminum alloy | Dimension | 1956*992*50mm(77.05*39.06*1.97inches) | Maximum Surface Load Capacity | 5400pa | Hail | maximun diameter of 25mm with impact speed of 23m-s-1 | Temperature Range | -40°C to + 85°C | Weight | 23.0kg(50.7bs) |
Module Type | OLPV130W | OLPV140W | OLPV150W | OLPV160W | OLPV165W | | Maximum power | 130 W | 140 W | 150 W | 160 W | 165 W | Max power voltage | 17.50 V | 17.70 V | 17.90 V | 18.10 V | 18.20 V | Max power current | 7.43 A | 7.92 A | 8.38 A | 8.84 A | 9.06 A | Open circuit voltage | 21.50 V | 21.70 V | 21.90 V | 22.10 V | 22.30 V | Short circuit current | 7.96 A | 8.49 A | 9.01 A | 9.53 A | 9.74 A | Module Efficiency | 13.13% | 14.14% | 15.15% | 16.16% | 16.67% | Power Tolerance | -0~+5W | -0~+5W | -0~+5W | -0~+5W | -0~+5W | Standard Test Conditions (STC): Irradiance 1000W/m2, Module
temperature 25℃? Air Mass (AM)=1.5 | Nominal Operating Cell Temperatur | 45 ± 2℃ | Temperature coefficients of Isc | +0.049% /℃ | Temperature coefficients of Voc | -0.340% /℃ | Temperature coefficients of Pmax | -0.430% /℃ | Solar Cell | Poly solar cells 156x156 mm | Front Cover | 3.2 mm thick, tempered glass | Back Cover | TPT (Tedlar-PET-Tedlar) | Encapsulant | EVA (ethylene vinyl acetate) | Frame | Double-layer anodized aluminium alloy | Junction Box | IP65 rated | Maximum System Voltage | DC1000V (IEC) | Maximum Series Fuse | 15 A | Operating Temperature | -40℃~+85℃ | Storage Temperature | -40℃~+85℃ | Max. Wind Load / Max. Snow Load | 2400Pa / 5400Pa | Application Class | Class A | Packing configuration | Carton.Customers packing requirement is acceptable. |
Our Service 1. Your inquiry related to our products or prices will be replied
in 24hours.
2. OEM&ODM, any your customized lightings we can help you to
design and put into product. 3. Distributoership are offered for your unique design and some our
current models 4. Protection of your sales area, ideas of design and all your
private information Payment Payment Term | T/T | EXW | 30% T/T in advance, paid the balance before shipment | FOB | CFR(C&F) | 30% T/T in advance, paid the balance against copy of B/L | CIF | L/C | L/C amount above 50,000 usd, we can accept L/C at sight | PayPal | Amount lower than 3000usd | PayPal | Delivery Time | 17~20days after receiving payment for one container |
|