1.25 MPa Automatic Industrial Boilers And Heat Recovery Steam Generators

1.25 MPa Automatic Industrial Control Flue Type Waste Heat Boiler

Product Description

1. The boiler is of outdoor arrangement, which is made of two vertical shaft type chimney flues at the front and rear parts. The front vertical shaft adopts all-suspension structure from and the walls at four sides are of membrane wall. Arranged from the top to bottom are primary air chamber, air distribution device, combustion chamber dense phase zone, dilute phase zone, generating tube bank, high temperature and low temperature super-heater and flue gas diversion chamber.

2. The vertical shaft at the rear part is of supporting structure, in which coal economizer and steel pipe horizontal air pre-heater are installed. The two vertical shafts are connected by two cyclone separators in parallel arrangement, with the bottom parts of the separator connected with feed back devices. Both the separator and feed back device are supported by steel structure beams.

3. We can manufacture the waste heat recovery boiler according to different clients' requirements in different industrial fields. Our manufacturer has owned strong fabricating capability, and we can meet the needs from the clients in different industries. We are very familiar with providing electric furnace flue, conveyor flue of steel mill, catalysing and cracking heat recovery boiler, sulfur heat recovery boiler, Alkali recovery boiler, pyrites acid-making heat recovery boiler, gas turbine combined cycle heat recovery boiler, coke dried quenching heat recovery boiler, etc.

Technical Parameters