RS485 Wire 33x Optical Zoom PTZ IP Camera 1080P Onvif Vehicle

Vehicle Mounted Onvif PTZ IP camera High Definition Full HD CCTV Camera 1080P 

Specification

►Support kinds of resolution IP network camera max 2.0 megapixel, 4.7~94.0mm 20x Optical zoom.

►Support IP network and analog dual video output.

►Support dual control. PTZ and camera zoom Could be controlled by RS485 and RJ45 network.

► Built in defrosting and defogging device. Can be work well even the temperpature change suddenly.

►Support coordinate display and angle acceptance instructions.

►Aluminum material, Shockroof, anti-corrosion. protection grade IP66 waterproof.

► Horizontal rotation 360°, Vertical rotation -70°~+90°.

► Strong anti shaking function, Strongly anti-seismic,suitable for kinds of police vehicle.

► Use powerful infrared IR light, nigh vision distance about 150meter.

►Vehicle power supply DC10.5V~dc18v.

►Camera with WDR 120 dB for better image.

► Local real time video viewing, remote video viewing and control.

►Support video playback by IE browser or OKAF Police Dynamic Forensics system software. 

How does OKAF Vehicle mounted PTZ camera system work?

Our vehicle CCTV PTZ IP Camera connect with 4G NVR , screen with joystick. It could realized local real time viewing, local real time control, playback. Remote real time viewing, remote control and playback.

Connect way :

1. The aviation cable connect with the camera at this aviation port. Attention the hole must be match perfectly, then plug into.

2. Another side there are RS485 wire, video wire, RJ45 wire and power wire. The orange color wire is RS485 positive electrode, the yellow color wire is RS485 negative electrode. Video wire and RS485 wires connect with the cable of screen with keyboard.

3. Cable of screen with keyboard another side plug into the BNC port of the device. The power wire of the screen cable connect with the NVR.

4. Use the provided VGA cable connect the NVR with the screen and keyboard.

5. Get a network cable, Connect RJ45 network port with NVR network port.

6. Connect the 4G antenna, GPS antenna.

7. Connect the power supply of the NVR.

8. Connect the power supply of the camera.Red wire is positive electrode, black wire is negative electrode. Please do not reverse the positive and negative poles of the power supply.

9. Finish the connection of camera, nvr and screen with joystick. Turn on the power, the system will work.

Technical data

OKAF Police Dynamic Forensics Complete system

Size of OKAF Vehicle CCTV IP camera OK-CT130GR-20IP