PQ control two color injection molding machine between tie bars
980mm*950mm Max.Mold Height 960mm
The Characteristic Of HAIJIA Special Machine
Characteristic
The machine use the high-performance servo dynamic control system,
the oil pump as the power source, having the characteristics as
follow: high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
High Energy saving
Under the ideal working state, Power consumption is 40% less than
that of variable displacement pump and 70% less than that of fixed
displacement pump, save the cost effectively.
The machine use the high-performance servo dynamic control
system,the oil pump as the power source,having the characteristics
as follow:high response,saving energy, low noise, high-control
precision, and have the breakthrough in the prefect connection of
the electrical servo and hydraulic drive system.
HJF780 High quality hydraulic injection Molding Machine| Injection Unit
|
A
B |
| Screw Diameter mm |
95
105 |
| Screw L/D Ratio L/D |
22
19.9 |
| Shot Size (Theoretical) cm3 |
3188
3894 |
| Injection Weight (PS) g |
2901
3543 |
| Injection Rate g/s |
640
781 |
| Injection Pressure Mpa |
175
143 |
| Screw Speed rpm |
115 |
| Clamping Unit
| |
| Clamp Tonnage
KN |
7800KN |
| Toggle Stroke
mm |
950 |
| Space Between Tie Bars mm |
980*950 |
| Max.Mold Height
mm |
960 |
| Min.Mold Height
mm |
400 |
| Ejector Stroke
mm |
280 |
| Ejector Tonnage
KN |
186 |
| Others
| |
| Max.Pump Pressure
Mpa |
16 |
| Pump Motor Power
KW |
37+30 |
| Heat Power
KW |
56.7 |
| Machine Dimension
m |
11.43*2.4*3.14 |
| Machine Weight
t |
37 |
hydraulic injection molding machine,hydraulic components of eurpean
and american brands with different circuit design ensure locking
fast,low nosie,shortent the molding cycle,improve production
efficiency
