Textile Laboratory Testing Equipment 45 Degree Flammability Tester

Laboratory Testing Equipment Textile 45 Degree Flammability Tester
 
Introduction:
 
45 Degree Flammability Tester, to determine the fabric flammability under controlled conditions. Flammability Tester complies with ASTM D1230, FTMS191-5908, etc.
 
Application:
 
The flammability tester is used to determine the burning characteristics of textile under controlled condition. Stainless steeltest cabinets with glass observation panel provided with automatic timing of flames spread in 0.1-second increments from ignition. Brushing Device including Spare Nylon Brush.
 
Specification:
 
1. Display: 0-99.9S
2.Resolution: 0.1S
3.Ignition time: 0-99.0S
4.Burn size: 368×216×356mm
5.Outer dimension(L×W×H):400×300×540mm
6.Weight: 35kg
7.Power: 1 phase,AC 220V/50Hz
8.Design criteria: ASTM D1230, FIMS 191-5908,CRF 16-1610,CALIF TB117,NEPA 702

 
Structure:

Flowmeter :Adjust the gas flow size;
Fire tube : The gas is first connected to the flow meter through the hose, and then through the rear hose of the box into the flame pipe;
Windscreen: the upper part of the windshield is provided with glass;
The experiment was carried out in a ventilated kitchen. The round hole on the top of the box and the gap on the windshield make the gas convection.
Control panel :Power- power switch ;Start:Start internal motor operation. When the flame tube moves to the test position (the vertical distance from the sample center is 8mm, the horizontal distance is 3.2mm), the internal timing switch is touched;
Reset :Timer reset /Fire tube reset;
Sample clamp and specimen holder :The sample frame substrate is provided with a knob which can adjust the left and right movement, and the sample frame substrate is moved and fixed by loosening and tightening the knob;
Timer :Display settings and actual ignition time.After the time is cleared, the fire tube can complete the required movement. Or the fire tube can not return to the original position after moving forward;
Test room size: W368 × D216 × H356mm
Sample shelf angle: 45 °
Flame spread time setting range: 0.01S-99.99S
ignition time of the sample surface : 1.0S ± 0.05S
 
Features:
 
Stainless steel test cabinet
Glass observation window
Accuracy: 0.01s
Automatic or manual ignition device
Brushing Device including Spare Nylon Brush
 

Our Company:

DONGGUAN YUYANG INSTRUMENT CO.,LTD is Located in Wanjiang District (Dongguan City, Guangdong Province,China),a famous historical town with prosperous industry and convenient transportation. We are a high-tech enterprise which is specialized in developing and manufacturing Fire Testing Equipment, Building Material Fire Tester, Wire and Cable Fire Tester, Environmental Test Chamber, Textile Testing Equipment, Toys Testing Equipment and etc. Decades of research and development strengthen the leading edge of YUYANG in this field, and established as an crucial role in R&D on high quality and high-cost performance of testing equipment.

YUYANG's testing equipment are widely used in various field: scientific institutions, colleges, inspection institutions, auto parts, electronics, electricals, lithium battery, LED, photoelectricity, mobile, plastic and rubber, display, telecommunication, chemical industry, aerospace, building material and product, wire and cable, toys, furniture, textile and fabrix, etc.

If you are interested in any of our products or would like to discuss a custom order. Please feel free to contact us. We are looking forward to forming succesful business with new clients around the world in the near future.