0~25mm High Frequency Wire Testing Equipment , Cable Spark Testing Machine 0-15kv
|
|
0~25mm High Frequency wire and cable Spark Testing Machine 0-15kv
Product Description:
Testing equipment for wire and cable High-frequency Spark tester for wire and cable production line with CE certificate: SS015K series high-frequency spark tester is an efficient and reliable product inspection device that can be used to precisely detect the broken skin, pinhole and bare copper of the conductor of the various wire and cable. It can detect the defective layer without damaging the inside electrical conductor. By using high frequency (3KHZ) and high volte electrode to replace traditional (50/60HZ) high volt electrode, its electrode tip can select a 50mm beaded-contact, copper brush, carbon brush or a roller, which can shorten installation dimension greatly and enhance detection speed to be ranging from 1000m/min to 2400m/min. This device developed based on Taiwan, Europe and American technology combination is very reliable and smart.
Specifications:
Test Voltage:1.0~15.0KV. Cable Diameter: 0~25mm. Output Frequency: 2.5-3.5KHz normal. Fast recovery time after fault (0.1s) The Sine Wave Spark Tester is a fast and reliable instrument used in distinguish wire faults and detecting bare wires. Its high-speed fault detection feature gives you prompt information without worsening the condition of the wire after the test. The use of high frequency (3KHz) enables a traditional commercial power frequency bead chain electrode to be shortened to 120mm HS015E Model. The Sine Wave Spark Tester is quality-assured to meet your needs.
Basic Function:
1.Fast recovery time after fault (0.1 second).
2.Occupies short space in line and with improvement factor of 50 compared to
3.traditional CT power frequency electrode.
4.Voltage Display: 0.0~15.0KV digit, 14.2mm LED display, Accuracy +/- 1% of reading
5.Output Control: Front Panel Reset in Manual Mode. Closure time is selectable
6.0.2s/2s/5s in main board by jumper JP, Form C relay contacts (250VAC/5A) for all
7.wire faults detected.
8.Limits the fault current without damaging the test equipment.
9.Short exposure time to corona does not degrade nor damage good insulation.
10.Distinguishes all wire faults and detects bare wire.
11.Safety Switch interlock.
Basic Specification:
|
||||||||||||||||||||||||||||||||||||||
| Product Tags: cable testing equipment spark testing equipment |
|
Copper Wire Cable Spark Tester , 250-300mm/Min Elongation Testing Machine |
|
UL817 IEC60335 Metal Wire And Cable Repeated Bending Testing Machine |
|
ISO7802 Metal Wire Torsion and Wrapping Tester Testing Machine |
|
Factory Wholesale Price Digital Type Spark Tester For Wire And Cable Machine |
|
Competitive Power Frequency Spark Tester For Wire And Cable Insulation Wrapper Tester |
|
Ventilation Type Aging Test Chamber for Testing the Wire And Cable Insulator ±2.0ºC |