ISO 8124-4 6.3 Toys Barriers and Handrails Dynamic Strength Testing Machine
|
ISO 8124-4 6.3 Toys Barriers and Handrails Dynamic Strength Testing Machine
Description:
This apparatus is used for dynamic testing of barriers and handrails When tested in accordance with 6.3, no part of the barrier or handrail shall collapse, such that the toy does not comply with the relevant requirements of this part of ISO 8124.
Principle:
A sudden horizontal impact stress is applied to the barrier or handrail, through a pad, by a falling load. Place and secure the pad to the top of the barrier or handrail at the most onerous position and without causing any damage to the toy. Attach the free end of the rope to the pad. Arrange the rope and the pulley so that the load hangs freely. Raise the load vertically 125 mm ± 10 mm and let it drop freely (this will give an impact energy of approximately 30 J). Within 10 s, remove all tension from the barrier.
Parameter:
1. Weight: 25 kg ± 1 kg 2. Impact height: 125mm±10mm 3. Impact way: free drop 4. Impact energy: 30J 5. Sample height: 90cm~240cm 6. Control: pulley control 7. Size(WxDxH) 56x85x254cm 8. Weight: ≈140Kg 9. Gas source: ≥6kgf/cm2 10. Power: 1∮ AC 220V 50Hz 3A 11. Size: 500×500×2500mm
Standard:
IS9873-4; ISO 8124-4 6.3 Dynamic strength of barriers and handrails (see 4.2)
|
Product Tags: sharp point tester tesla gauss meter |
![]() |
ISO 8124-1 Kinetic Energy Tester Projectile Velocity Tester Toy Testing Equipment |
![]() |
ISO 8124-1 Toys Kinetic Energy Testing Equipment Toys Testing Equipment 1.000000S |
![]() |
Children Toys Testing Equipment Projectile Velocity Tester / Kinetic Energy Tester |
![]() |
ASTM F963 EN-71 Small Parts Cylinder Toys Safety Testing Equipment |
![]() |
16 CFR 1500 / EN 71 Toys Testing Equipment Snap Button Pull Testing Machine |
![]() |
EN71.8.17.2 ISO 8124-1 Mouth Toy Endure Tester & Mouth-Actuated Tester |