1-4mm ERW Tube Making Machine for Carbon Steel Stainless Steel Pipes
|
Thickness 1-4mm Straight Seam Welding ERW tube making machine
The model and basic parameters
Scope of Supply:
1) Machine installation & test running for Buyer.
2) Sufficiently train operation method to Buyer's operators.
3) Reference document (in English): foundation drawing (including the arrangement of water, electricity and air etc.), circuit diagram and operation instruction, etc
4) Additional Rollers for welded pipe will be ordered and designed according to type and specification provided by Buyer.
Material: Cr12
Scope of work excluded (Buyer scope)
1) Foundation construction and electric appliance work, civil engineering and necessary materials.
2) Machine to machine wire, mechanical pipe, water pipe;
3) Lubricating oil, cycle oil, gear box oil, cooling circulating water
4) D .Safety appliance, out of standard security items
5) Test run material, magnetic rod, bearing etc. low value consumables.
6) The buyer is responsible for power supply, water supply and gas supply to the equipment interface connector. Air compressor (1.5 cubic meters/minutes) High frequency tube Straight Seam Welding Pipe Mill, Pipe making machine
1. Description This equipment is specially used for producingΦ20-Φ80mm, δ0.5-2.0mm high-frequency straight seam welded pipe and corresponding square pipe (17*17-62*62mm,1.2-3.0mm). The composition of equipment is from uncoiler to fixed length cutting saw. Rolling speed can be according to suitable range of pipe diameter and wall thickness.
2. Applicable material: 1 Raw material: Low-carbon steel, 2 Thickness of steel strip: 1.0-3.5mm 3 The width of steel strip: 60-240mm 4 I.D. of steel coil: Φ450-Φ550mm 5 O.D. of steel coil: Φ800-Φ1200mm 6 Maximum weight coil: 2500kgs
3. Dimension range of processing steel tube: 1 O.D of pipe: Φ20-Φ80mm 3 Length: 4-8m 4 Milling speed: 60-70m/min 5 High-frequency equipment power: 250 KW (Solid state) 6 Voltage:380V/440V,50HZ 4. Milling speed: 20-100M/min(choose different speed as per different pipe diameter and thickness)
5. Product (steel tube) process flow: Raw material (steel coil) → uncoiling → shearing and end welding → material accumulating → non-power leveling → mill-forming → high-frequency welding → removing burrs outside of weld seam → cooling → sizing → roughly straightening → fixed length cutting → finishing tube
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Product Tags: erw tube mill stainless tube mills |
|
ERW Pipe Mill Machine with High Frequency Welding |
|
0.3-1mm Thickness ERW Welding Pipe Mill 8-20mm Diameter |
|
ERW Carbon Steel Pipe Mill 21-63mm Diameter 100m/min Speed |
|
ERW Steel Pipe Manufacturing Machine for 21-63mm Pipes |
|
Carbon Steel ERW Pipe Mill for 32-89mm Tubes with HF Welder |
|
Erw Carbon Steel Pipe Making Machine Manufacturer Steel ERW Welding Pipe Mill 8-20mm Diameter Steel Tube Mill production Lines |