TORCH MANUFACTURE AUTO PARTS ENGINE SPARK PLUG F6TC FOR MITSUBISHI
NISSAN TOYOTA INFINETI
1. Product Details:
| Torch Type | F6TC |
| Thread | M14*1.25 |
| Reach | 19 mm |
| Hex | 20.8 mm |
| application | HONDA,Hyundai,Land
Rover,MG,MITSUBISHI,Mazda,Mercedes-Benz,Nissan,PORSCHE,Rover,SUZUKI,,VW,BMW |
| Electrode Type | Cooper Core |
| Resistor or None-resistor | Non-Resistor |
| Delivery | By Sea, from any ports of China |
| Payment Term | 30% T/T ADVANCE, 70% T/T BALANCE BEFORE DELIVERY |
2. Photo show:
3. Important Tips:
1).Be careful not to drop the spark plug on the bottom plate or hard
objects, otherwise it will cause internal cracks and changes in the
gap between the electrodes, which will damage the performance of
the spark plug and even cause the spark plug to fail.
2).The high-voltage wire connector should be pulled out with light
force, and the spark plug should not be shaken with force during
operation, otherwise the performance of the spark plug may be
damaged.
3).The spark plugs can be removed before the engine cools. After
loosening, a thin hose can be used to blow off the dirt around the
spark plug one by one to prevent the surrounding dirt from falling
into the combustion chamber after the spark plug is unscrewed.
4).Around the screw, spark plug electrode and sealing ring must be
kept clean, dry and free of oil, otherwise it may cause problems
such as leakage and weakening of the leaking spark plug.
5).When installing, first use the sleeve to align the spark plug with
the screw hole, and then gently screw it into 1/2 of the full
length of the thread, and then tighten it with an afterburner
lever; With or without entrained impurities, do not blindly fasten.
6).It should be tightened according to the requirements. If it is too
loose, it will cause air leakage. If it is too tight, the sealing
gasket will lose its elasticity. Since the cone seat type spark
plug does not need a sealing gasket, it is particularly important
to observe the tightening torque.
4. About Our Company:
Our factory has been manufacturing spark plug for more than 58
years, we have ranked China No.1 and world No.3. Besides spark plug
we also have ignition coil and cable, all types of filters,
mechanical seals, and brake pad.
We have the most reliable welding technologies of platinum and
iridium;Therefore, we can produce high quality spark plugs
competing with any other supplier.Now, we are asked to manufacture
spark plugs as OE replacement for some famous brands.
5. Leave Message:
If your are interested in this product or the other products which
fall in our product line, please send me a message or write an
email to me ( jessica@torchgroup.cn) at any time.
