HW-222C02M11-0200-4310:
The CMM has been developed for the
aerospace,avionics,instrumentation & control,defence and
transportation markets,with applications that induce
IFES,HUDs,fight controls,FADEC units,radars,missiles,
electro-optical sighting systems,satellites,mobile radios,power
supplies,UAVs and engine controls.It is also used engine
controls.It is also used in a growing number of medical,and telecom
applications, pecializes in the design,development and manufacture of
electronic connectors.
Part numbering:
FIXING HARDWARE FOR CMM 220 FEMALE | REFERENC | ASSEMBLY ON PCB | OVERALL DIMENSIONS | RECOMMENDATION | M11
| | | M11 :
CMM Female :
Y-YL-T-S-C-E
(D :straight)
|
MALE STRAIGHT ON CABLE P/N 30-33xx (solder or crimp):
| Loaded | Unloaded | Ampere | Cable A | ØB | ØC | Length D hole | Length E body | Length F conductor | Solder | Crimp by HX3 Hexagone size/Dies | Crimp by AF8 | | | | | AWG 20 | AWG 18 | AWG 16 | AWG 14 | AWG 12 | | | | | | | | | | 3305 | 30-3305 | 5A | × | | | | | 1,1mm | 1,65
mm | 6,2mm | 6,7mm | 4,5mm | OK | Hex.1,9 mm/C14923 | OK | | 3308 | 30-3308 | 8A | | × | | | | 1,35mm | 1,85
mm | 6,2mm | 6,7mm | 4,5mm | OK | Hex.1,9 mm/C14923 | OK | | 3310 | 30-3310 | 10A | × | × | × | | | 1,7mm | | 6,2mm | 6,7mm | 6mm | OK | | OK | | 3315 | 30-3315 | 15A | | | | × | | 2mm | | 6,2mm | 6,7mm | 6mm | OK | | OK | | 3320 | 30-3320 | 20A | | | | | × | 2,6mm | | 6,2mm | 6,7mm | 5,3mm | OK | | OK |
Materials and coating: | Materials and coating | | Insulating medium | Glass fiber reinforced PPS, UL94-V0 Radiation resistant, non hygroscopic, ozone resistant | | Contact | Copper alloy nickel base plating | | Enclosure | stainless steel | | Electrical performance index | | Voltage withstand test (sea level) | 800V AC/DC | | Insulation resistance | ≥1000MΩ | | Rated current | LF contact: working current 25 C, ≤ 3A; Working current 85 C, ≤ 2.2A; contact resistance ≤10mΩ | | Mechanical performance index | | Mechanical life | 500 times of plugging and unplugging | | Environmental performance index | | Operating ambient temperature | -55℃ to 125℃ |
1. The contacts are distributed, and it is recommended to crimp the
AWG22 wire for LF contacts; 2. After LF contact is pressed into the base with special tools, it
is recommended to use the heat shrinkable sleeve shrinks its tail and fills the base cavity with glue; Product display:
|
