Galvanzied Steel Duct Liner Cup Head Weld Pins With Capacitor Discharge Welder

Galvanzied Steel Duct Liner Cup Head Weld Pins Product Introduce :

Product name:cup head pin ,cup head weld pins ,duct liner pins ,sutd welding pins 

Material :low carbon steel or stainless steel for pin and washer 

Plating :galvanized/copper plating for pin ,galvanized for washer 

Washer dia :25mm,30mm

Pin dia :12GA(2.7mm),3.0mm,3.4mm

Pin length :25mm,38mm,50mm,75mm,100mm, 120mm.130mm,150mm,170,mm ect 

Bevel Washer edge is beveled to prevent cutting of insulation material.
Paper Insulating Washers available for welding through foil faced insulation.
Paper insulating washers can be ordered separately or factory installed.

Cup head weld pin is mainly used for fasten the insulation to the sheet metal of insulation

construction. It works with welding equipment, through welding for fasten the insulation.

Specification of Galvanzied Steel Duct Liner Cup Head Weld Pins :

Pic of Galvanzied Steel Duct Liner Cup Head Weld Pins :

Install of Galvanzied Steel Duct Liner Cup Head Weld Pins :

Recommended assembly method:
1.Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter.
2.Remove the protective release paper taking care not to touch the adhesive.
3.Place the hanger in the required position and press the base against the surface to be insulated
4.Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength

of adherence is achieved after 24 hours

Package of Galvanzied Steel Duct Liner Cup Head Weld Pins :

HUIHAO COMPANY :